System Configuration Menu - HP ProBook 6360b Maintenance And Service Manual

Select
TPM Embedded Security
Disk Sanitizer
System IDs

System Configuration menu

NOTE:
Select
Language
Boot Options
Downloaded from LpManual.com Manuals
Some of the listed System Configuration options may not be supported by your computer.
To do this
Enable/disable support for Trusted Platform Module (TPM)
Embedded Security, which protects the computer from
unauthorized access to owner functions available in
Embedded Security for ProtectTools. For more information,
refer to the ProtectTools software Help.
NOTE: You must have a setup password to change this
setting.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.
CAUTION:
If you run Disk Sanitizer, the data on the
selected drive is destroyed permanently.
Enter a user-defined computer asset tracking number and
ownership tag.
To do this
Change the Computer Setup language.
●
Set a Startup Menu delay (in seconds).
● Set the Multiboot Express Boot Popup delay (in seconds).
● Enable/disable Custom Logo (disabled by default).
●
Enable/disable Display Diagnostic URL (enabled by
default).
● Enable/disable CD-ROM boot (disabled by default).
●
Enable/disable SD Card boot (enabled by default).
●
Enable/disable floppy boot (enabled by default).
●
Enable/disable PXE Internal NIC boot (enabled by
default).
●
Enable/Disable Unified Extensible Firmware Interface
(UEFI) Boot Mode (disabled by default).
● Set the Legacy Boot Order.
Computer Setup menus
113