Transferring Calls; Supervised Transfers - Panasonic DBS 576HD User Manual

To retrieve a call . . .
From a different extension
than the one that placed the
call on hold
From Floating Hold (also
known as Station Park Pick
Up)
Note: The number of floating hold orbits available may very depending on the
Station/Floating Park Hold Pickup setting (FF1-0-02-0025). The station/park pickup
access code can set to *9 (default) or 733. The floating hold pickup access code (*9)
operates as follows:
System Size
96
Above 96
(DBS 576 only)

TRANSFERRING CALLS

You can transfer a call to an open extension, a busy extension, or an outside line.
These transfers can be either supervised or unsupervised.
Note: If a transferred call is not answered within a specified time, the call rings
again at the extension that transferred it.

Supervised Transfers

In a supervised transfer, you announce the call before transferring it. This allows
you to give the recipient information about the call.
To supervise the transfer of a call to another extension or an
outside number
1. While on a call, press the HOLD key.
576-36-750
4. Handling Incoming Calls
Do . . .
Press the FF key that is flashing red.
a. Press the Floating Hold FF key.
OR
a. Enter the Floating Hold Answer code (default
= *9).
b. Enter the Floating Hold orbit number (001-
576[CPC-288/576], 10-96 [CPC-96, HS, HM]
or 001-099 [CPC-288/576] or 01-09 [CPC-96,
HS, HM]. See the note below.
Virtual Line Number and Operation
01-09 Floating Hold pick up
10-96: Station Park Hold pick up purpose
001-099 Floating Hold pick up
100-576: Station Park Hold pick up purpose
DBS 576 (USA), issued October 2000 59