Panasonic Programmable Controllers FP-X Series Specifications page 22

FP-X series
Specifications

Input specifications (control unit, expansion unit and add-on cassette)
Item
Relay output (control unit and expansion unit)
Insulation method
Rated input voltage
Operating voltage range
Approx. 4.7mA (Control unit X0 to X7)
Rated input current
Approx 4.3mA (Control unit X8 and after, Expansion unit)
Input points per common
Min. ON voltage/ON current
Max. OFF voltage/OFF current
Approx. 5.1k (Control unit X0 to X7)
Input impedance
Approx. 5.6k (Control unit X8 and after, Expansion unit)
Control unit X0 to X7
0.6ms or less: Normal input
50 s or less: High-speed counter, pulse catch,
OFF ON
interruption input setting *
Response
time
Control unit X8 and after, Expansion unit
0.6ms or less
OFF ON
Operating indicator
*1
Note: Specification at the rated input voltage of 24VDC, 25°C.

Relay output specifications (control units, expansion units)
Item
Output type
Rated control capacity (Resistive load)
Output points per common
OFF ON
Response time
ON OFF
Mechanical
Life time
Electrical
Surge absorber
Operating indicator

Transistor output specifications (Control unit, expansion unit and add-on cassette)
Item
Insulation method
Output type
Rated load voltage
Load voltage allowable range
Max. load current
Max. inrush current
C14: 6 points/common, E16: 8 points/common, C30, C60, E30: 8 or 6 points/common
Output points per common
OFF state leakage current
ON state voltage drop
OFF ON
Response time
OFF ON
Voltage range for external power supply
Surge absorber
Operating indicator
*2
Note: Please refer to the user manual for Y0 to Y7 of the transistor output type.
22
Transistor output (control unit and expansion unit)
Approx. 8mA (Control unit X0 to X3)
Approx. 4.7mA (Control unit X4 to X7)
Approx. 4.3mA (Control unit X8 and after, Expansion unit)
8 points/common (C14, E16) 16 points/common (C30, C60, E30)
(Input power polarity either positive or negative)
19.2V/6mA (Control unit X0 to X3)
19.2V/3 mA
19.2V/3mA (Control unit X4 and after, Expansion unit)
2.4V/1.3mA (Control unit X0 to X3)
2.4V/1 mA
2.4V/1mA (Control unit X4 and after, Expansion unit)
Approx. 3k (Control unit X0 to X3)
Approx. 5.1k (Control unit X4 to X7)
Approx. 5.6k (Control unit X8 and after, Expansion unit)
Control unit X0 to X3
135 s or less: Nominal input
5 s or less: High-speed counter, pulse catch,
interruption input setting*
Control unit X4 to X7
1
135 s or less: Nominal input
50 s or less: High-speed counter, pulse catch,
interruption input setting*
Control unit X8 and after, Expansion unit
0.6ms or less
Same as above
2A 250VAC, 2A 30VDC (8A or less/common)
C14, E16: 1 point or 3 points/common, C30, E30: 1 point or 4 points/common, C60: 1, 2 or 4 points/common
20 million operations or more (Operation frequency 180 times/min)
100,000 operations or more (Operation frequency 20 times/min at the rated control capacity)
Control unit, Expansion unit
NPN type: 5 to 24VDC, PNP type: 24VDC
NPN type: 4.75 to 26.4VDC, PNP type: 21.6 to 26.4VDC
0.5A
0.3VDC or less
2
1ms or less*
2
1ms or less*
21.6 to 26.4VDC
Description
Add-on cassette (AFPX-IN8, AFPX-IN4T3)
Photocoupler
24VDC
21.6 to 26.4VDC
8 points/common (AFPX-IN8), 4 points/common (AFPX-IN4T3)
1
1
LED display
Description
1a contact
Approx. 10ms
Approx. 8ms
None
LED display
Description
Add-on cassette (AFPX-TR8, AFPX-TR6P, AFPX-IN4T3)
Photocoupler
Open collector
NPN type: 0.3A, PNP type: 0.5A
1.5A
TR8: 8 points/common, TR6P: 6 points/common, IN4T3: 3 points/common
1 A or less
Zener diode
LED display
01/2008
Approx. 3.5mA
19.2V/3mA
2.4V/1mA
Approx. 6.8k
1.0ms or less
1.0ms or less
24VDC
21.6 to 26.4VDC
1.5VDC or less
0.1ms or less
0.8ms or less
—