When Not In Use - Toshiba PLK-45SD Instruction Manual

POURING
WARNING
Do not turn over or tilt the pot.
Do not terribly shake (especially shake
up and down) or strike the pot.
Do not hold the lid while moving the
pot.
The water will flow out from the water
dispenser or the steam vent. Then the
pot may slip and fall down, and cause
some burns and injury.
1
Press the UNLOCK button, then
the button will be unlocked.
SOFT
PUMP
NORMAL
: The UNLOCK indicator will light up.
About 2 seconds after the pot is unlocked,
[
the water can be poured out. And 2 minutes
later, the pot will be automatically locked.
2
Place the cup under the water
dispenser and press the PUMP button.
Then, the water will pour out.
SOFT
PUMP
NORMAL
There is 2 selectable levels of water pouring.
Please select with the proper use.
SOFT : For slowly pouring into the small
container such as a cup, etc.
NORMAL : For pouring a great amount of water
such as for cooking, etc.
The UNLOCK indicator will light up.
[
When wanting to lock right after pouring water
Press the UNLOCK button and the UNLOCK
indicator will light off
NENL13740000000_(02-10)
PROHIBITED
UNLOCK
UNLOCK
9
Reducing Chlorine
REBOIL
Press the button once while
TIMER
boiling and press it twice while
warming. Then, the REDUCE
CHLORINE indicator (
: The BOIL indicator will
flash and the REDUCE
CHLORINE indicator
( ) will light up.
While the water has been
[
boiling for 3 minutes,
the amount of chlorine
will be reduced.
[When the water
is reboiled
Please press the button
[
twice.
When the pot is nearly empty
Fill the water before the water
reaches the water level gauge

When not in use

Unplug the power cord and detach
the lid. After that, pour out all the
water.
L Regarding the prevention to warm
the empty pot
To prevent the accident from overheating, if it is
found that the empty pot is warmed (for example,
there is the distribution of power supply when the
pot is empty.), the electric current distributed to the
heater will be cut off and it is noticeable from the
"bee bee bee, bee bee bee, bee bee bee" signal
sound and the indicator flashing.
REDUCE
EMPTY CHLORINE
Flashing
Flashing
alternately
SAVE
WARM
MODE
; Please fill the water and press the
If the empty pot is warmed many times, the
[
coated fluorocarbon-resin may discolor or peel
away.
24/3/08, 14:59
) will light up.
Example: In case of
warming at the
temperature of "98"
REDUCE
EMPTY CHLORINE TIMER
CLEAN
SAVE
BOIL
WARM
MODE
TIMER
CLEAN
BOIL
REBOIL
button.
TIMER
9