Programming The Remote Control - Sony KDL-60NX801 Operating Instruction

Bravia lcd digital color tv
Hide thumbs Also See for KDL-60NX801:
Table of Contents

Advertisement

Programming the Remote Control

Your remote control can be programmed to use other equipment and is pre-programmed to
operate the following Sony equipment.
Function Button Sony Equipment Code Number
DVD
AMP
STB
Programming Other Equipment
2
2
4
3
Confirm the Programming
If you can turn your equipment on and off using the green POWER button, the
programming is complete. If not, try the next code listed.
~
• In some cases, you may not be able to program your remote control. If this is the case, use your
equipment's own remote control.
• Any of the function buttons (DVD, AMP, STB) can be programmed to operate other equipment
regardless of the labeling. For example, if programmed with the correct code, a Blu-ray Disc player
can be operated with the DVD button. This is useful if your equipment does not match any of the
labeled buttons.
To reset the remote control to the factory default:
Press SCENE, TV POWER, and
AMP, STB, and TV) blink when successfully reset.
Downloaded From TV-Manual.com Manuals
DVD Player
31033
Receiver
52172
Digital Satellite
01639
Follow the steps below to program your TV remote control.
1 Look for the code in the Manufacturer's Code List (refer to
i-Manual) that corresponds to the equipment you would like to
operate with the Sony remote control. If more than one code is
provided, try programming the first code listed. If your
equipment's code is not listed, visit
http://esupport.sony.com/remotecodes for a more comprehensive
list.
2 Press and hold a DVD, AMP or STB function button
simultaneously with INPUT button and release.
When in the programming mode, the function button (DVD,
4
AMP, STB) blinks for approximately 30 seconds until a code is
entered.
3 Enter the five digit code using
buttons (DVD, AMP, STB) are lit. If the code is not entered
within 30 seconds, you must repeat step 2.
4 Press
or ENT to confirm the code. If successfully
programmed, the function button (DVD, AMP, STB) will blink
twice, if not, it blinks five times.
simultaneously. The four function buttons (DVD,
-
while the function
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents