Search Screen - Canon MG7500 series Online Manual

Search Screen

Note
• This screen is not available depending on the printer you are using.
The access points detected are listed.
1. Detected Access Points:
The signal strength from the access point, encryption type, name of access point, and the radio channel
can be confirmed.
Important
• If you connect to a network that is not protected with security measures, there is a risk of
disclosing data such as your personal information to a third party.
Note
• Signal strength is displayed as follows.
: Good
: Fair
: Poor
• Type of encryption is displayed as follows.
Blank: No encryption
WEP: WEP is set
WPA/WPA2: WPA/WPA2 is set
2. Update
Click to update the list of access points when your target access point is not detected.
If the target access point is set to the stealth mode, click Cancel to return to the previous screen and
enter the access point's SSID in SSID: on the Wireless LAN sheet.
Wireless LAN Sheet
Note
• When detecting your target access point, make sure that the access point is turned on.
324