Panasonic SH-WL30 Operating Instructions Manual page 2

[ENGLISH]
This unit allows you to convert the security type of your
®
home Wi-Fi environment from WPA
For further dedicated help, support and advice
about your ALL Series product please visit:
http://panasonic.jp/support/global/cs/audio/ALL/
index.html
(This site is in English only.)
Accessories
∏ 1 AC adaptor
∏ 1 DC cable
∏ 1 LAN cable
≥ Do not use any other AC adaptors except the
supplied one.
≥ The supplied DC cable is for use with this system
only. Do not use it with other equipment. Also, do not
use cords from other equipment with this system.
2
SQT1348
Control reference guide
Top
TM TM
to WPA2 .
Rear
13
12
1 Power indicator
The unit is in the standby condition when the AC
adaptor is connected. The primary circuit is always
"live" as long as the AC adaptor is connected to an
electrical outlet.
2 5 G indicator
3 2.4 G indicator
4 WPS indicator
5 LAN1 indicator
6 LAN2 indicator
7 DC IN terminal
DC 5 V 1.8 A
8 LAN2 terminal
9 LAN1 terminal
10 RESET button
Use a paper clip or similar to press this button
when this unit is not working correctly, for
example.
12
11 WPS button
12 QR code
13 Key
13
* Lights up or flashes when the corresponding function
is in operation.
≥ When this unit is not working correctly, disconnect
and reconnect the AC adaptor first.
If the problem persists, press and hold the RESET
button for at least 5 seconds with a paper clip or
similar, and then release the button.