Download Print this page
Panasonic WV-NS950 Specifications
Panasonic WV-NS950 Specifications

Panasonic WV-NS950 Specifications

Wv-ns950 series super dynamic iii day-night dome network camera
Hide thumbs Also See for WV-NS950:

Advertisement

Quick Links

Dome Network camera featuring 30x zoom and Super Dynamic III

Key Features

• Super Dynamic III technology delivers 128x wider dynamic range
compared to conventional cameras.
• High sensitivity with Day-Night function: 0.5 lux (Color) at F1.4 (WIDE), 0.04 lux (B/W) at F1.4
(WIDE). IR cut filter switches on and off to ensure optimal picture quality in both color and B/W.
• Adaptive Digital Noise Reduction: 2D-DNR and 3D-DNR integration
ensures reduced noise and motion blur in various conditions.
• Electronic sensitivity enhancement: Auto (Up to 32x) / OFF
• 30x zoom lens: 3.8 mm ~ 114 mm (approx. 300x with digital zoom)
• Pan/Tilt speed of max. 400°/s at preset mode and 0.065°/s super fine control at manual mode
• 5 degrees upper view for various applications
• Auto tracking: The camera automatically pans and tilts to follow a
moving subject and keep it in the center of the image.
• Built-in Video Motion Detector with 4 programmable detection areas and 6 sensitivity levels
• Scene Change Detection alarms when lens is covered, spray painted, removed or defocused.
• Various I/O terminals: ALARM IN 1 / BW IN, ALARM IN 2 / ALARM OUT, ALARM IN 3 / AUX OUT
• Alarm sources include Terminal 1 ~ 3, VMD and Panasonic alarm command. Alarm actions include
Preset positions 1 ~ 256, PATROL 1 ~ 4, SD memory recording, FTP image transfer, E-mail
notification, Indication on browser, Terminal output, Panasonic protocol output and Auto track.
• Auto image stabilizer for applications where vibration or wind is a concern
• Camera title display: 16 alphanumerics OSD and 20 alphanumerics on the browser
• Digital Slip-ring Transmission: The high speed digital video signal supplied
by the Super Dynamic III DSP travels through the compact slip-ring
without any DA/AD conversion process preventing image quality loss.
• Built-in MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
• MPEG-4 and JPEG dual stream output for simultaneous live
monitoring and high resolution recording
• Progressive output with motion adaptive interlace/progressive conversion
allows every image to be clear even when the object is moving.
• PTZ control can be made on the user-friendly GUI with 16 speeds
pan/tilt and new "Drag and Zoom" operation enabling finer control.
256 speeds available for system with WV-CU950 system controller.
• 360° map shot: 8 thumbnail images at 45° intervals make it simple to
direct the camera by clicking on a thumbnail.
Day-Night Dome Network Camera
WV-NS950
WV-NS954
(24 V AC)
• Built-in network interface (10Base-T / 100Base-TX)
• Multiscreen: Image from 16 cameras can be displayed in 4 different
Quad screens or 16-screen (JPEG only).
• FTP client function enables periodic image data transfer or transfer upon alarm.
• Alarm notification via e-mail
• Max bit rate/client (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) or frame
rate priority mode (4,096 kbps / Unlimited) for MPEG-4 and Total bit rate control (64 / 128 /
256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.
• Full duplex 2-way audio allows interactive communication between
camera site and monitoring site.
• Alarm log, Manual REC log, FTP error log saved in the SD memory card
is displayed on the browser GUI and can be downloaded to the client
PC. Playback or Image data download through the log is also available.
• Multi-language GUI and setup menu: English, French, Italian, Spanish, German,
Russian (PAL), English, French (NTSC), (Installation required except for English).
• SD memory card slot for Manual recording, Alarm recording and Backup upon network failure
• Scheduling function for Alarm / VMD / Access permission, Preset
position call and Position refresh

Standard Accessories

• Operating Instructions ................... 1 pc.
• CD-ROM ....................................... 1 pc.
The IP setup software, the viewer software
and the network operating instructions
(PDF) are included on the CD-ROM.

Optional Accessories

Ceiling
Embedded Ceiling
Pendant
Mount Bracket
Mount Bracket
Mount Bracket
WV-Q105
WV-Q116
WV-Q117
Super Dynamic III
Series
WV-NS950
(220 ~ 240 V AC)
WV-NS954
(24 V AC)
The following items are for installation.
• Decorative Cover .......................... 1 pc.
• Dust Protection Sheet ................... 1 pc.
• 8P Alarm Cable ............................. 1 pc.
• Connector for 24 V AC (only for WV-NS954) ..... 1 pc.
• RJ-45 junction connector .............. 1 pc.
Wall
Smoke
Mount Bracket
Dome Cover
WV-Q118
WV-CS3S

Advertisement

loading

Summary of Contents for Panasonic WV-NS950

  • Page 1: Key Features

    • Various I/O terminals: ALARM IN 1 / BW IN, ALARM IN 2 / ALARM OUT, ALARM IN 3 / AUX OUT • Alarm sources include Terminal 1 ~ 3, VMD and Panasonic alarm command. Alarm actions include Preset positions 1 ~ 256, PATROL 1 ~ 4, SD memory recording, FTP image transfer, E-mail notification, Indication on browser, Terminal output, Panasonic protocol output and Auto track.
  • Page 2: Specifications

    Important – Safety Precaution: carefully read the operating instructions and installation manual before using this product. – Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network. NTSC 3x Terminal inputs, VMD, Command alarm...

This manual is also suitable for:

Wv-ns954