Setting The Consistency Of Grind; Maintenance Settings - Jura GIGA X7 Professional Instructions For Use Manual

4 Permanent settings in programming mode
Setting the consistency
of grind

Maintenance settings

28
In the programme item
grind' you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (2/5)'
T Press the
'Set consistency of grind'
'Set consistency of grind'
T Press the 'Right grinder'
'Right grinder'
T Press the '+' or
sistency of grind.
T Press the 'Save'
'Saved' appears briefly on the display.
'Set consistency of grind'
O T Press the P button to exit programming mode.
'Please select product:'
In the programme item
tings' you can make the following settings:
U
'Filter'
U
Activate the CLARIS Pro Blue filter cartridge (see Chapter 5
'Maintenance – Inserting and activating the filter').
U
'Water hardness'
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 'Permanent settings in pro-
gramming mode – Setting the water hardness').
U
'Switch-on rinse' /
U
The switch-on rinse must be started manually.
U
'Switch-on rinse' /
U
The switch-on rinse is started automatically.
'Product settings (2/5)' /
is displayed.
is displayed.
button.
'–' button to change the setting for the con-
button.
'Machine settings (3/5)' /
'Manual'
'Automatic'
'Set consistency of
'Product
button.
'Maintenance set-