Panasonic NETWORK CAMERA WV-NW502S Installation Manual page 23

r Accommodate the connected cables
inside the cable guide of the camera
mount bracket.
Important:
• To prevent the cables from being caught
when the cover is attached, keep the
cables inside the cable guide.
t Attach the base cover.
y Use the bit for tamperproof screw
(accessory) to tighten the fixing screws
provided on both sides of the base
cover.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
Cable guide
Connected cable
Base cover
Cable guide
Base cover fixing screw
23