Troubleshooting; Manual Test Mode; Manual Test Mode Commands - Motorola SLVR L7 Service Manual

Level 1 and 2 Service Manual

Troubleshooting

Manual Test Mode

Manual Test Mode Commands

Table 3. Manual Test Commands
Key Sequence
<Menu>048263* Enter manual test mode
"End" Key Exit manual test mode
54* Suspend
0*0*0 Select tone 0
0*0*1 Select tone 1
0*0*2 Select tone 2
0*0*3 Select tone 3
0*0*4 Select tone 4
0*0*5 Select tone 5
0*0*6 Select tone 6
0*0*7 Select tone 7
0*0*8 Select tone 8
0*0*9 Select tone 9
0*1*X Disable tone X
3*0*1 Enable vibrator
3*0*0 Disable vibrator
5*0*0 Set audio level 0
5*0*1 Set audio level 1
5*0*2 Set audio level 2
5*0*3 Set audio level 3
5*0*4 Set audio level 4
5*0*5 Set audio level 5
5*0*6 Set audio level 6
5*0*7 Set audio level 7
6809495A77-O
Motorola M SLVR L7 telephones are equipped with a manual test mode
OTOROLA
capability. This allows service personnel to verify functionality and perform fault
isolation by entering keypad commands.
To enter the manual test command mode, a GSM / DCS test SIM must be used.
Press u to turn the phone OFF.
1.
2. Remove the battery as described in the procedures.
3. Remove the customer's SIM card from the phone as described in the
procedures.
4. Insert the test SIM into the SIM slot.
5. Replace the battery as described in the procedures.
Press u to turn the phone ON.
6.
Test Function/Name
September 23, 2005
Remarks
Required for all Test Mode Operations
Troubleshooting
39