Huawei S6502 Installation Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Router
  5. Quidway S6502
  6. Installation manual
Huawei S6502 Installation Manual

Huawei S6502 Installation Manual

Hide thumbs Also See for S6502:
Table of Contents

Advertisement

Quick Links

Download this manual
HUAWEI
Quidway S6502 Ethernet Switch
Installation Manual
Release 3000 Series
Huawei Technologies Proprietary

Advertisement

Table of Contents
loading

Related Manuals for Huawei S6502

Summary of Contents for Huawei S6502

  • Page 1 HUAWEI Quidway S6502 Ethernet Switch Installation Manual Release 3000 Series Huawei Technologies Proprietary...
  • Page 2 3104A076 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. If you purchase the products from the sales agent of Huawei Technologies Co., Ltd., please contact our sales agent. If you purchase the products from Huawei Technologies Co., Ltd. directly, Please feel free to contact our local office, customer care center or company headquarters.
  • Page 3 Copyright © 2005 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks , HUAWEI, C&C08, EAST8000, HONET,...

  • Page 4: About This Manual

    Chapter 1 Product Overview The chapter introduces the characteristics of S6502 Ethernet Switch according to the forwarding engines. Chapter 2 Line Processing Unit The chapter introduces LPUs of S6502 Ethernet Switch. Chapter 3 Installation Preparation The chapter introduces the installation preparation and precaution of S6502 Ethernet Switch.
  • Page 5 Chapter 5 System Debugging The chapter introduces the system debugging. Chapter 6 Switch Monitoring and Maintenance The chapter introduces the monitoring and maintenance of S6502 Ethernet Switch. Appendix A Lightning Protection of the Switch The appendix introduces lightning protection of S6502 Ethernet Switch.
  • Page 6 Note, Comment, Tip, Knowhow, Thought: Means a complementary description. Environmental Protection This product has been designed to comply with the requirements on environmental protection. For the proper storage, use and disposal of this product, national laws and regulations must be observed. Huawei Technologies Proprietary...

  • Page 7: Table Of Contents

    1.4.1 Specifications ......................1-6 1.4.2 Panel and LEDs ...................... 1-7 1.4.3 Port Cable ....................... 1-8 1.5 Relationship between Switching Engines and Cards ............1-8 1.6 Overall Hardware Layout of S6502..................1-8 1.6.1 Chassis........................1-8 1.6.2 Backplane......................1-12 1.6.3 Power Supplies ..................... 1-12 1.6.4 External PoE Power Supply ..................
  • Page 8 Installation Manual Quidway S6502 Ethernet Switch Table of Contents 2.5.2 Panel and LEDs ...................... 2-8 2.5.3 Matching Cable ....................... 2-8 2.6 LS81FP48-48-port 100Base-FX(SFP) Ethernet Card ............2-9 2.6.1 Introduction......................2-9 2.6.2 Panel and LEDs ....................2-10 2.6.3 Matching Cable ..................... 2-10 2.7 LS81GT8UA-8-port 10/100/1000Base-T Ethernet Card..........
  • Page 9 Installation Manual Quidway S6502 Ethernet Switch Table of Contents 2.16 LS81GP8UB-8-port 1000Base-X (SFP) Ethernet Card..........2-29 2.16.1 Introduction to Card..................... 2-29 2.16.2 Panel and LEDs ....................2-30 2.16.3 Matching Cable ....................2-31 2.17 LS82GP20-20-port 1000Base-X (SFP) Ethernet Card..........2-31 2.17.1 Introduction to Card..................... 2-31 2.17.2 Panel and LEDs ....................
  • Page 10 Installation Manual Quidway S6502 Ethernet Switch Table of Contents 4.5 Connect Ground Wire and Power Cord................4-2 4.5.1 Connect Ground Wire ..................... 4-2 4.5.2 Connect AC Power Cord..................4-5 4.6 Install Cabling Rack ......................4-6 4.7 Install Switch Boards ......................4-6 4.8 Connect Port Cables......................
  • Page 11 Installation Manual Quidway S6502 Ethernet Switch Table of Contents 6.3.6 Dealing with Failed Loading .................. 6-25 6.3.7 Dealing with Lost Password .................. 6-26 Appendix A Lightning Protection of the Switch.................A-1 A.1 Installation of Lightning Arrester for AC Power (Socket Strip with Lightning Protection)..A-1 A.2 Installation of Lightning Arrester for Network Port.............A-2...

  • Page 12: Chapter 1 Product Overview

    络 络 Figure 1-1 S6502 in a MAN S6502 supports 1+1 redundant AC and DC power supplies. One of its slots is designed for switching engine and the other for the LPU. Both of them can provide high-density service ports.

  • Page 13: Srpu Specifications

    LPU software. Processing monitoring signals on the power system and fans, which are transferred through the backplane. In addition to these functions, the SRPU of S6502 also can provide high-density service ports: LS81P12TE: provides four 10/100/1000BASE-T ports and 12 × 1000BASE-X (SFP) ports.

  • Page 14: Ls81P12Te

    Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview 1.3 LS81P12TE Figure 1-2 Appearance of an LS81P12TE 1.3.1 Specifications Table 1-2 LS81P12TE specifications Item LS81P12TE MPC8245 Boot ROM 512KB Flash memory 32MB SDRAM 256M Dimensions (L × W) 366.7 × 340 mm (14.4 × 13.4 in.)

  • Page 15: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview Item LS81P12TE IEEE 802.3z IEEE 802.3ab IEEE 802.1p IEEE 802.1Q IEEE 802.1D Supported standard IEEE802.1X IEEE802.1s IEEE802.1w IEEE 802.3x IEEE 802.3ad IEEE802.3 1.3.2 Panel and LEDs LS81P12TE has four 10/100/1000BASE-T ports and 12 × 1000BASE-X (SFP) ports;...

  • Page 16: Cable

    Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview 1.3.3 Cable I. 1000BASE-X (SFP) port cable Table 1-4 Description of 1000BASE-X (SFP) port cable Maximum Central Conn SFP module Matching cable transmission wavelength ector distance 50/125 µm 550 m (1804...

  • Page 17: Ls81T12Pe

    Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview Maximum Central Conn SFP module Matching cable transmission wavelength ector distance 9/125 µm single SFP-GE-LH70-SM1 1610nm mode optical fiber 70km (43 mi) 610-CW cable 1000BASE-T-FD-S RJ45 100m (328 ft) II. 10/100/1000Base-T port cable Category-5 twisted pair cable is ended with RJ45 connectors, whose maximum transmission distance is 100 m.

  • Page 18: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview Item LS81P12TE 1000 Mbps full duplex (optical port) 10 Mbps half/full duplex (electric port) Port rate 100 Mbps half/full duplex (electric port) 1000M full duplex (electric port) SFP module Refer to Table 1-4...

  • Page 19: Port Cable

    LS81TGX1B √ √ LS81TGX1C √ √ LS81T12PE √ √ LS81P12TE √ √ 1.6 Overall Hardware Layout of S6502 1.6.1 Chassis I. Front view S6502 uses the XG high-speed bus, whose chassis is labelled with silk-printed characters: XGbus. Huawei Technologies Proprietary...
  • Page 20 (for PoE management), console port, 10Base-T/100Base-TX management port and its status LED, fan LED, card status LED. S6502 provides two horizontal slots, with the upper for SRPU and the lower for LPU. The SRPU is mandatory, and the lower slot can hold many types of LPU cards.
  • Page 21 Quidway S6502 Ethernet Switch Chapter 1 Product Overview Note: S6502 switch can provide power to the powered devices (PDs) connected, such as IP phone sets, WLAN access point (AP), through the external PoE power distribution unit and its card supporting PoE function.
  • Page 22 Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview Item Description Function For system software upgrade and network management The corresponding LEDs are described in the following table. Table 1-11 Management port status LEDs Status No link is presented.

  • Page 23: Backplane

    (1) PoE power input (2) Grounding screw Figure 1-7 Rear view of an S6502 chassis An S6502 chassis provides -48V DC input for connection with external PoE power distribution unit. Note: The backplane, SRPU, power module and fan tray all are required components in S6502.
  • Page 24 Quidway S6502 Ethernet Switch Chapter 1 Product Overview Note: The S6502 supports either AC or DC input, but they cannot run concurrently. You can choose the specific type as needed. Although the system can operate normally when one power module is working, the S6502 still provides two slots for power modules, in attempt to support 1+1 redundancy.

  • Page 25: External Poe Power Supply

    1.6.5 Fan Tray The fan tray is at the right side of an S6502 chassis, and directly connected to the backplane through a connector. The fan fault signals are summarized and transmitted from the backplane to the SRPU for further processing.

  • Page 26: Technical Specifications

    Installation Manual Quidway S6502 Ethernet Switch Chapter 1 Product Overview Figure 1-9 Fan tray on an S6502 1.7 Technical Specifications Table 1-16 System specifications Item S6502 Physical dimensions (H × W × 130.5 x 436 x 400 mm (5.12 x 17.2 x 15.8 in.) Weight (fully configured) ≤44 lb (20 kg )

  • Page 27: Chapter 2 Line Processing Unit

    Chapter 2 Line Processing Unit 2.1 Brief Introduction to LPU Based on industry standard and complying with modular designing idea, S6502 combines advantages of the mainstream products in the field. The reasonable division of the system module ports makes it has a sound system structure and standardized and independent functional modules.

  • Page 28: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81FT48A 10/100 Mbps half-/full-duplex Interface transmission speed MDI/MDI-X auto-sensing Matching cable Category-5 twisted pair with maximum transmission maximum transmission distance of 100 m (328 ft) distance IEEE802.3 IEEE802.3x IEEE802.3ad...

  • Page 29: Ls81Ft48E-48-Port 10/100Base-T Fast Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.3 LS81FT48E-48-port 10/100Base-T Fast Ethernet Card Figure 2-3 LS81FT48E appearance 2.3.1 Introduction to Card This LPU provides 48 × 10/100 Mbps auto-sensing Ethernet electrical interfaces. Table 2-3 LS81FT48E attribute...

  • Page 30: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81FT48E IEEE802.3 IEEE 802.3ad IEEE802.3x IEEE802.1p Conformed standard IEEE802.1D IEEE802.1Q IEEE802.1X IEEE802.1s IEEE802.1w 2.3.2 Panel and LEDs Figure 2-4 LS81FT48E panel Every port has a green LED. The following table describes the LED state.

  • Page 31: Ls81Ft48F-Poe-Supported 48-Port 10/100Base-T Fast Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.4 LS81FT48F-PoE-Supported 48-port 10/100Base-T Fast Ethernet Card Figure 2-5 LS81FT48F appearance 2.4.1 Introduction to Card This LPU provides 48 × 10/100 Mbps auto-sensing Ethernet electrical interface service channels. And all the interfaces support PoE, that is, to implement remote power supply to PDs through Ethernet twisted pair cables.

  • Page 32: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81FT48F Maximum power Each port provides a maximum power of 15.4 W for the each port connected device. provide IEEE802.3 IEEE802.3x IEEE 802.3ad IEEE802.1p IEEE802.1D Conformed standard IEEE802.1Q IEEE802.1X...

  • Page 33: Ls81Fm24A/Ls81Fs24A-24-Port 100Base-Fx Mmf/Smf Fast Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.5 LS81FM24A/LS81FS24A-24-port 100Base-FX MMF/SMF Fast Ethernet Card Figure 2-7 LS81FM24A/LS81FS24A appearance 2.5.1 Introduction to Card This LPU provides 24 100 Mbps auto-sensing Ethernet optical interfaces. Table 2-7 LS81FM24A/LS81FS24A attribute...

  • Page 34: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Description Attribute LS81FM24A LS81FS24A Optical fiber 62.5/125 µm multimode 9/125 µm single mode optical maximum optical fiber cable with the fiber cable with the maximum transmission maximum transmission transmission distance of 15 km distance distance of 2 km (1.2 mi)

  • Page 35: Ls81Fp48-48-Port 100Base-Fx(Sfp) Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.6 LS81FP48-48-port 100Base-FX(SFP) Ethernet Card Figure 2-9 LS81FP48 2.6.1 Introduction This LPU provides 48 × 100 Mbps full duplex SFP Ethernet optical ports. Table 2-10 LS81FM24A/LS81FS24A technical specifications Attribute...

  • Page 36: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81FP48 IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3ad IEEE802.1p Conformed standard IEEE802.1D IEEE802.1Q IEEE802. 1X IEEE802.1s IEEE802.1w 2.6.2 Panel and LEDs Figure 2-10 LS81FP48 panel Each 100 Mbps electrical port has a green LED with it, which is described in the following table.

  • Page 37: Ls81Gt8Ua-8-Port 10/100/1000Base-T Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Maximum Central Matching SFP module Connector transmission wavelength cable distance 100BASE-FX-SM- 1310nm 15 km (9.3 mi) 9/125 µm 100BASE-FX-SM- single mode 1310nm 40 km (24.9 mi) LR-SFP optical fiber...

  • Page 38: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81GT8UA IEEE 802.3ab IEEE802.3 IEEE802.3x IEEE802.3ad IEEE802.1p Conformed standard IEEE802.1D IEEE802.1Q IEEE802.1X IEEE802.1s IEEE802.1w 2.7.2 Panel and LEDs Figure 2-12 LS81GT8UA panel Every port has two LEDs. The following table describes the LED state.

  • Page 39: Ls81Gt8Ue-8-Port 10/100/1000Base-T Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.8 LS81GT8UE-8-port 10/100/1000Base-T Ethernet Card Figure 2-13 LS81GT8UE appearance 2.8.1 Introduction to Card This LPU provides eight 10/100/1000 Mbps auto-sensing Ethernet electrical interfaces. Table 2-15 LS81GT8UE attribute Attribute LS81GT8UE...

  • Page 40: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81GT8UE IEEE 802.3ab IEEE802.3 IEEE802.3x IEEE802.1D Conformed standard IEEE802.1Q IEEE802.1X IEEE802.1s IEEE802.1w 2.8.2 Panel and LEDs Figure 2-14 LS81GT8UE panel Every port has two LEDs. The following table describes the LED state.

  • Page 41: Ls82Gt20-20-Port 10/100/1000Base-T Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.9 LS82GT20-20-port 10/100/1000Base-T Ethernet Card Figure 2-15 LS82GT20 appearance 2.9.1 Introduction to Card This LPU provides 20 x 10/100/1000 Mbps auto-sensing Ethernet electrical interfaces. Table 2-17 LS82GT20 attribute Attribute...

  • Page 42: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.9.2 Panel and LEDs Figure 2-16 LS82GT20 panel Every port has one LED. The following table describes the LED state. Table 2-18 LED state description of LS82GT20 State Description No link is present.

  • Page 43: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Table 2-19 LS82GT20A attribute Attribute LS82GT20A MPC8241 BootROM 512 KB SDRAM 128M Dimensions (L × W) 366.7 × 340 mm (14.4 × 13.4 in.) Maximum power 45 W consumption...

  • Page 44: Matching Cable

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Table 2-20 LED state description of LS82GT20A State Description No link is present. LINK/ACT A link is present Blinking Packets are being transmitted/received on the port. 2.10.3 Matching Cable The matching cable to the interface is category-5 twisted pair with a maximum transmission distance of 100 m (328 ft).

  • Page 45: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81GT48 IEEE 802.3ab IEEE802.3 IEEE802.3x IEEE802.1p Conformed standard IEEE802.1D IEEE802.1Q IEEE802.1X IEEE802.1s IEEE802.1w 2.11.2 Panel and LEDs Figure 2-20 LS81GT48 panel Every port has a LED. The following table describes the LED state.

  • Page 46: Ls81Gt48A-Poe-Supported 48-Port 10/100/1000Base-T Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.12 LS81GT48A-PoE-Supported 48-port 10/100/1000Base-T Ethernet Card Figure 2-21 LS81GT48A appearance 2.12.1 Introduction to Card This LPU provides 48 x 10/100/1000 Mbps auto-sensing Ethernet electrical interface service channels. And all the interfaces support PoE, that is, to implement remote power supply to PDs through Ethernet twisted pair cables.

  • Page 47: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81GT48A IEEE 802.3ab IEEE802.3 IEEE802.3x IEEE802.1p IEEE802.1D Conformed standard IEEE802.1Q IEEE802.1X IEEE802.1s IEEE802.1w IEEE802.3af 2.12.2 Panel and LEDs Figure 2-22 LS81GT48A panel Every port has a LED. The following table describes the LED state.

  • Page 48: Ls81T12P-12-Port 10/100/1000Base-T + 4-Port 1000Base-X (Sfp) Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.13 LS81T12P-12-port 10/100/1000Base-T + 4-port 1000Base-X (SFP) Ethernet Card Figure 2-23 LS81T12P appearance 2.13.1 Introduction to Card This LPU provides 12 x 10/100/1000 Mbps auto-sensing Ethernet electrical interfaces and four 1000 Mbps full-duplex SFP interfaces.

  • Page 49: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81T12P IEEE 802.3z IEEE 802.3ab IEEE 802.1p IEEE 802.1Q IEEE 802.1D Conformed standard IEEE802.1X IEEE802.1s IEEE802.1w IEEE 802.3x IEEE 802.3ad IEEE802.3 2.13.2 Panel and LEDs Figure 2-24 LS81T12P panel The following table describes the LED state.

  • Page 50: Matching Cable

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.13.3 Matching Cable I. Matching cable for 4-port 1000Base-X (SFP) optical interface Table 2-27 Description of 1000BASE-X (SFP) cable Maximum Central Conn SFP module Matching cable transmission wavelength ector...

  • Page 51: Ls81P12T-12-Port 1000Base-X (Sfp) + 4-Port 10/100/1000Base-T Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Maximum Central Conn SFP module Matching cable transmission wavelength ector distance 9/125 µm single SFP-GE-LH70-SM1 1610nm mode optical fiber 70km (43 mi) 610-CW cable 1000BASE-T-FD-S RJ45 100m (328 ft) II.

  • Page 52: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81P12T Dimensions (L × W) 366.7 × 340 mm (14.4 × 13.4 in.) Maximum power consumption 35 W Connector RJ-45, LC Number of interfaces 1000 Mbps full-duplex (optical/electrical)

  • Page 53: Matching Cable

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.14.3 Matching Cable Refer to 2.13.3 . 2.15 LS81GB8UA-8-port 1000Base-X (GBIC) Ethernet Card Figure 2-27 LS81GB8UA appearance 2.15.1 Introduction to Card This LPU provides 8 1000 Mbps full-duplex Ethernet GBIC interfaces.

  • Page 54: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81GB8UA IEEE 802.3 IEEE 802.3z IEEE 802.3x IEEE 802.3ad IEEE 802.3z Conformed standard IEEE 802.1p IEEE 802.1Q IEEE 802.1D IEEE 802.1X IEEE 802.1s IEEE 802.1w Note: GBIC module is a hot-swappable connector which can connect with optical fiber. A GBIC module provides one data receive/transmit channel.

  • Page 55: Ls81Gp8Ub-8-Port 1000Base-X (Sfp) Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.15.3 Matching Cable Table 2-32 Matching cable available for LS81GB8UA Maximum Central Matching GBIC module Connector transmission wavelength cable distance 50/125 µm multimode 500 m (1640 ft) optical fiber...

  • Page 56: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Table 2-33 LS81GP8UB attribute Attribute LS81GP8UB MPC850 BootROM 512 KB SDRAM Dimensions (L × W) 366.7 × 340 mm (14.4 × 13.4 in.) Maximum power 15 W consumption Connector...

  • Page 57: Matching Cable

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Table 2-34 LED state description of LS81GP8UB State Description No link is present. LINK/ACT A link is present Blinking Packets are being transmitted/received on the port. 2.16.3 Matching Cable Refer to Table 2-27.

  • Page 58: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS82GP20 SFP modules Refer to Table 2-27 IEEE802.3 IEEE802.3z IEEE802.1p IEEE802.1Q IEEE802.1D Conformed standard IEEE802.3x IEEE802.1X IEEE802.1w IEEE802.3ad IEEE802.1s 2.17.2 Panel and LEDs Figure 2-32 LS82GP20 panel The following table describes the LED state.

  • Page 59: Ls82Gp20A-20-Port 1000Base-X (Sfp) Ethernet Card

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.18 LS82GP20A-20-port 1000Base-X (SFP) Ethernet Card Figure 2-33 LS82GP20A appearance 2.18.1 Introduction to Card This LPU provides 20 1000 Mbps full-duplex SFP interfaces. Table 2-37 LS82GP20A attribute Attribute LS82GP20A...

  • Page 60: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.18.2 Panel and LEDs Figure 2-34 LS82GP20A panel The following table describes the LED state. Table 2-38 LED state description of LS82GP20A State Description No link is present. LINK/ACT...

  • Page 61: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81TGX1B Maximum power consumption 35 W Connector Number of interfaces 10 GE Interface transmission speed Full-duplex 10GBASE-SR-XENPAK (multimode optical fiber, 850 nm, 300 m) 10GBASE-LR-XENPAK (single mode optical fiber,...

  • Page 62: Matching Cable

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit 2.19.3 Matching Cable Table 2-41 Matching cable available for LS81TGX1B Maximum XENPAK Central Connector Matching cable transmission module wavelength distance 10GBASE-SR- multimode optical 850nm 300 m (984 ft) XENPAK...

  • Page 63: Panel And Leds

    Installation Manual Quidway S6502 Ethernet Switch Chapter 2 Line Processing Unit Attribute LS81TGX1C 10GBASE-SR-XENPAK (multimode optical fiber, 850 nm, 300 m) 10GBASE-LR-XENPAK (single mode optical XENPAK modules fiber, 1310 nm, 10 km) 10GBASE-ER-XENPAK (single mode optical fiber, 1550 nm, 40 km) IEEE 802.1p...

  • Page 64: Chapter 3 Installation Preparations

    Do not place the switch on a moist area and avoid liquid flowing into the switch. 3.1.3 Moving The S6502 is rather big and heavy, so follow the recommendations below when moving them. Turn off all powers and remove all the power cords before moving the chassis.

  • Page 65: Wearing An Esd Wrist Strap

    Note: The ESD wrist strap is shipped with the S6502. There is an ESD wrist strap hole on the left side of the S6502 power module. The grounding screw is located on the bottom right corner of the chassis rear.

  • Page 66: Laser

    Chapter 3 Installation Preparations 3.1.5 Laser Some LPUs of S6502 have optical ports. In operating status, it is prohibited to stare into the open optical port because the laser emitted from it has very high power density and is harmful to your retina.

  • Page 67: Anti-Static Requirements

    Installation Manual Quidway S6502 Ethernet Switch Chapter 3 Installation Preparations Table 3-1 Required specifications on dust density in an equipment room Mechanical active Unit Content material ≤3 x 10 Dust particle particles/m³ (No visible dust on desk in three days) Note: Dust particle diameter ≥...

  • Page 68: Grounding Requirements

    AC input voltage: 100 VAC to 240VAC, 47 Hz to 63 Hz Power output: 300W 3.3 Installation Planning Since the S6502 is a kind of complex equipment, it is necessary to make a good plan and arrangement concerning installation position, networking measure, power supply and cabling before installing it.

  • Page 69: Installation Tools

    Multimeter, 500V Meg-ohmmeter (used to measure the insulation resistance), error detector, optical Instruments power meter and earth resistance tester Note: The instruments and tools are not shipped with the S6502, so you need to make them available by yourself. Huawei Technologies Proprietary...

  • Page 70: Chapter 4 Hardware Installation

    Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Chapter 4 Hardware Installation S6502 shall work in a fixed place indoors. 4.1 Confirm the Installation Preparation Make sure that you have read Chapter 3 carefully. All requirements introduced in Chapter 3 have been met.

  • Page 71: Mount The Switch In 19-Inch Standard Rack

    Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation 4.3 Mount the Switch in 19-Inch Standard Rack S6502 has an integrated chassis and should operate indoors. Take the following installation steps. Step 1: Confirm the following before installation: The rack has been well fixed. The installation position for the switch has been well arranged and there is no obstacle around.
  • Page 72 Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Note: The grounding screw is located on the bottom right corner of the chassis. I. Common grounding environment Step 1: Remove the screw from the grounding hole in the switch chassis.
  • Page 73 Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Ethernet Switch Ethernet Switch Ethernet Switch Ethernet Switch Grounding screw Grounding screw Grounding screw Grounding screw Power input Power input Power input Power input Grounding wire Grounding Grounding wire Grounding...

  • Page 74: Connect Ac Power Cord

    (2) Bail latch (3) Handle of power module (4) Power LED Figure 4-5 S6502 power module The power module has AC input socket with bail latch and a power LED on its front panel (The LED is described in 6.1.2).

  • Page 75: Install Cabling Rack

    Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation 4.6 Install Cabling Rack For your convenience, cabling racks are shipped together with an S6502. Take the following steps to install the rack. Step 1: Face the I/O card slot of the switch;...

  • Page 76: Connect Port Cables

    Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Note: Save the removed blank panel for future use. 4.8 Connect Port Cables 4.8.1 Connect Console Cable I. Introduction Console cable is an 8-core shielded cable. One end of the cable is a crimped RJ-45 connector, which is to be plugged into the console port of the switch.

  • Page 77: Connect Category-5 Cables

    4.8.2 Connect Category-5 Cables I. Introduction The 10Base-T/100Base-TX and 1000Base-T ports of an S6502 match RJ-45 connectors, and are MDI/MDIX autosensing. You can use category-5 cables to connect it. The following figure illustrates the appearance and pinouts of an RJ-45 connector.

  • Page 78: Connect Optical Fibers

    Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Note: Tx refers to Outbound Rx refers to Inbound BI refers to Bi-directional Table 4-3 RJ-45 MDI-X port pinout assignment 10Base-T/100Base-TX 1000Base-T Pinout Signal Function Signal Function Bi-directional data cable...
  • Page 79 Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation which makes optical system debugging and maintenance more convenient and transit dispatching more flexible. Among multiple fiber connectors, only SC, LC, and MT-RJ will be introduced here. MT-RJ fiber connector: It integrates two channels of light sources into a single fiber, which reduces the actual ports that are in use of a connector.

  • Page 80: Recommendations On Cabling

    Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Caution: When the optical port has not been connected with a fiber connector or its dustproof cover is open, there might be some invisible radiation emitted from the optical port. So do not stare into the optical port directly.
  • Page 81 Use the right type of ties to bind the cables. Do not bind any cables with tied ties. Huawei technologies provides the following types of ties: 100*2.5mm, 150*3.6mm, 300*3.6mm, 530*9mm, and 580*13mm; Bind the cables with ties and cut the extra parts. Trim the cut and leave no sharp points.
  • Page 82 Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Figure 4-13 Cable binding example II Before bending the cables, bind them first. Mind that no tie binds the bended part of any cables, for fear of cable core breaking due to excessive stress. See the following figure.

  • Page 83: Check After Installation

    Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation For the cable terminals fixed with screw thread, the screws or nuts should be fastened and prevented from loosing. See the following figure; Flat Flat Flat Flat Spring Spring washer...
  • Page 84 Installation Manual Quidway S6502 Ethernet Switch Chapter 4 Hardware Installation Caution: Confirm that you have turned off the power before checking, otherwise, improper connection will hurt people or the component of the switch. After installing the switch, please check if the items listed in the following table are normal.

  • Page 85: Chapter 5 System Debugging

    Installation Manual Quidway S6502 Ethernet Switch Chapter 5 System Debugging Chapter 5 System Debugging 5.1 Setting up Configuration Environment 5.1.1 Setting up Configuration Environment A terminal (a PC in this example) is connected to the switch console port through a console cable.
  • Page 86 Installation Manual Quidway S6502 Ethernet Switch Chapter 5 System Debugging Step 1: Start the PC and run the terminal emulator (such as Terminal on Windows3.1 HyperTerminal Windows95/Windows98/Windows 2000/Windows NT/Windows XP/Windows ME). Step 2: Set the parameters for Windows98 HyperTerminal as follows: Click Start >...
  • Page 87 Installation Manual Quidway S6502 Ethernet Switch Chapter 5 System Debugging Figure 5-3 Setting serial port for HyperTerminal connection After selecting serial ports, click <OK>. The following interface will pop up for setting serial port parameters. Set the baud rate to 9600, data bits to 8, parity check to none, stop bits to 1 and flow control to none.
  • Page 88 Installation Manual Quidway S6502 Ethernet Switch Chapter 5 System Debugging After setting serial port parameters, click <OK>. Then the system will enter the HyperTerminal dialogue box as shown in the following figure. Figure 5-5 HyperTerminal interface In the above dialogue box, select the Properties icon to enter the properties window.

  • Page 89: Powering On And Booting

    Check if any system indicator on the SRPU indicates abnormal condition. 5.2.4 Booting Interface As the switch is started, the configuration terminal will yield the following output: Starting..RAM Line..OK System is booting....****************************************** Quidway S6502 BOOTROM, Version 500 Huawei Technologies Proprietary...
  • Page 90 <Quidway> Note: The S6502 provides a variety of command views. For the specific descriptions on the configuration commands and command line interfaces, refer to Quidway S6500 Series Ethernet Switches Operation Manual and Quidway S6500 Series Ethernet Switches Command Manual.

  • Page 91: Chapter 6 Switch Monitoring And Maintenance

    This chapter describes how to troubleshoot. On the SRPU of the S6502, you can find the state LEDs of LPU, power supply, and fan and locate the faults accordingly. 6.1.1 Configuration System Troubleshooting After the switch is powered on and the system is normal, the booting information will be displayed on the configuration terminal.

  • Page 92: Power Troubleshooting

    The blank filler plates are furnished on the chassis where there is no card inserted. 6.1.4 Cards Troubleshooting The LEDs of LPUX (X ranges from 1 to 2 in the S6502) show the state of these cards respectively. Huawei Technologies Proprietary...

  • Page 93: Hardware Maintenance

    Step 2: Pull the module to be replaced until it slides out of the slot. Caution: Because the S6502 power module is heavy, use both hands to pull it out. Hold the module in one palm and gently pull the handle with the other hand. Install a blank filler panel on the chassis for dust-proof and heat dissipation if you will not install another module in this position.

  • Page 94: Service Card Replacement

    Check it carefully. 6.2.2 Service Card Replacement SRPU and LPUs of the S6502 can be installed and removed basically in the same way. This section describes the general measures of installing and removing these cards. Cards of the S6502 are hot-swappable.

  • Page 95: Fan Frame Replacement

    Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Step 2: Hold the ejector levers on the card with both hands and press them toward both sides of you to separate the connectors of the card from the motherboard.

  • Page 96: Bootrom And Host Software Loading

    Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance II. Replacing fan frame Step 1: Wear the ESD wrist strap. Loosen the captive installation screws in the fan frame. Hold the fan frame with one hand, and pull the handle of the frame outward with the other, making the fan frame pin disconnected from the backplane.

  • Page 97: Loading Software Locally Via Boot Menu

    I. Boot Menu After power on, the switch will run BOOTROM program first and the terminal will display the following information: ****************************************** Quidway S6502 BOOTROM, Version 500 ****************************************** Copyright(C) 2001-2008 by HUAWEI-3COM TECHNOLOGIES CO.,LTD. Creation date: Feb 23 2005, 09:36:37...
  • Page 98 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Memory Size : 256MB S6502 main board self testing........ SDRAM Data lines Selftest.........OK! SDRAM Address lines Selftest......OK! SDRAM fast selftest........OK! Please check LEDs.....LEDs selftest finished! CPLD selftest..........OK! The switch Mac address is .....0000.0309.0004 Press Ctrl+B to enter Boot Menu...
  • Page 99 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Reboot Enter your choice(0-5): II. Loading software from console port using XModem Introduction to XModem XModem is a file transfer protocol widely used due to its simplicity and good functions.
  • Page 100 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Step 3: Choose an appropriate download baud rate. Type <5> as shown in the above example to choose the baud rate of 115200 bps. Press <Enter>. The system displays...
  • Page 101 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Figure 6-3 Properties dialog box Figure 6-4 Console port configuration dialog box Huawei Technologies Proprietary 6-11...
  • Page 102 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Step 6: Click the Disconnect icon to disconnect HyperTerminal from the switch and then click the Connect icon to re-establish the connection using the new baud rate setting.
  • Page 103 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Figure 6-7 Sending file interface After completing the downloading, the system displays the following information: Downloading ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCdone! Are you sure to update SRPU bootrom? Yes or No(Y/N)y Step 10: Enter <Y> to start file downloading and <N> to return to the program downloading menu.
  • Page 104 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Step 12: Reset HyperTerminal’s baud rate to 9600 bps with reference to Steps 5 and 6 described above. Note: You do not need to reset the HyperTerminal’s baud rate and can skip the last step if you have chosen 9600 bps.
  • Page 105 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Step 3: Run terminal emulation program on the PC that is connected to the console port. Start the switch, access Boot Menu, and then enter download protocol menu.
  • Page 106 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Select <1>. The subsequent steps are the same as those for loading BOOTROM, except for the displayed prompt messages. IV. Loading Software from Ethernet Port Using FTP Introduction to FTP A switch can be used via Ethernet port as an FTP server or a client to provide another approach for software loading and file configuration.

  • Page 107: Loading Software Remotely And Locally Via Commands

    Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Step 4: In the download protocol menu, type <2> to select FTP protocol to download BOOTROM and host software. Press <Enter>. The system displays the following information: Load File name...
  • Page 108 Note: The S6502 supports dual image booting, that is, usually the switch boots with the main image (i.e. the primary file), but it uses the backup image (i.e. the backup file) when the primary one is in error.

  • Page 109: Booting The Switch With Dual Images

    FTP. 6.3.4 Booting the Switch with Dual Images The S6502 supports dual image booting: usually the switch boots with the main image (i.e. the primary file), but it uses the backup image (i.e. the backup file) when the main image is in error.
  • Page 110 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance BOOT MENU 1. Download application file to flash 2. Select application file to boot 3. Display all files in flash 4. Delete file from flash 5. Modify bootrom password 0.

  • Page 111: Loading Combined Bootrom File

    6.3.5 Loading Combined BOOTROM File Since the S6502 supports multiple types of cards of and these cards use different versions of BOOTROM, you are required to use the appropriate BOOTROM file when upgrading the BOOTROM of a card. The upgrading fails if the BOOTROM file does match the card.
  • Page 112 BOOTROM of every card by using single BOOTROM files. II. Examples of upgrading using combined BOOTROM file Predefined conditions: the SRPU on slot 0 of the S6502 is LS81P12TE; the LPU on slot 1 is LS81FT48A; the combined BOOTROM file is S6502btm.btm; the version of the host software which supports the combined BOOTROM file is S6502.app.
  • Page 113 [ftp] get S6502.app S6502.app [ftp] get S6502btm.btm S6502btm.btm [ftp] bye Step 2: Specify S6502.app as the application software applied by the switch during the next boot. <Quidway> boot boot-loader primary S6502.app Step 3: Reboot the switch to make the S6502.app effective.
  • Page 114 Installation Manual Quidway S6502 Ethernet Switch Chapter 6 Switch Monitoring and Maintenance Note: Using Boot Menu, you can only upgrade the BOOTROM of an SRPU. And use the command line if you need to upgrade the BOOTROM of the LPU.

  • Page 115: Dealing With Failed Loading

    Here takes the command line mode as an example. Predefined conditions: the card on slot 0 of the S6502 is LS81SRPUA, and its corresponding BOOTROM file is SRPUbtm.app; the card LS81FT48A is on slot 1, and its corresponding BOOTROM file is LPUbtm.app.

  • Page 116: Dealing With Lost Password

    If loading fails when there are neither physical connection problems nor input errors, contact the local agents of Huawei Technologies for help. 6.3.7 Dealing with Lost Password Please contact the local agent of Huawei Technologies if the BOOTROM password or user password of the switch is lost. Huawei Technologies Proprietary...

  • Page 117: Appendix A Lightning Protection Of The Switch

    Installation Manual Quidway S6502 Ethernet Switch Appendix A Lightning Protection of the Switch Appendix A Lightning Protection of the Switch A.1 Installation of Lightning Arrester for AC Power (Socket Strip with Lightning Protection) Caution: Lightning arrester will not be shipped with the switch. You should purchase it by yourself if needed.

  • Page 118: Installation Of Lightning Arrester For Network Port

    Installation Manual Quidway S6502 Ethernet Switch Appendix A Lightning Protection of the Switch Caution: Make sure that the arrester is well grounded before using the lightning arrester for power. After inserting AC power cord plug of switch into the socket of lightning arrester, if the green LED is on and the red LED does not alarm, it means that the lightning arrester of power is running and the function of lightning protection has taken effect.
  • Page 119 Installation Manual Quidway S6502 Ethernet Switch Appendix A Lightning Protection of the Switch Multimeter Tilted wire cutter II. Installation procedure Step 1: Tear the protection paper at one side of the double faced adhesive tape apart from the tape, and stick the tape on the surface of the arrester. Tear the protection paper at another side apart from the tape, and stick the arrester onto the chassis of the switch.
  • Page 120 Installation Manual Quidway S6502 Ethernet Switch Appendix A Lightning Protection of the Switch III. Installation precautions Fully consider the following items in the installation process, otherwise, the performance of the lightning arrester for network port will be affected: Lightning arrester for network port is installed in reverse direction. In practice, the “IN”...

Table of Contents