Side
l AUTO SET UP button ・・・・・・・・・・・・・・・・・・ (p. 49)
Pressing this button while projecting an image
automatically corrects the picture positioning
on the screen. While the auto setup feature is
active, a message "PROGRESS..." appears on the
screen.
m SHUTTER button ・・・・・・・・・・・・・・・・・・・・・ (p. 48)
Pressing this button toggles the projector's
internal mechanical shutter to black out the
projected image.
n ASPECT button ・・・・・・・・・・・・・・・・・・・・・・・ (p. 50)
Toggles through the aspect ratio settings
appropriate for the current input signal.
o LENS (FOCUS, ZOOM, SHIFT) button ・・・ (p. 40)
These buttons are used together with the arrow
keys to adjust the projection lens.
p Function 1 (FUNC1) button ・・・・・・・・・・・・ (p. 49)
This button function can be assigned on the
"FUNC1" line of the "PROJECTOR SETUP" page,
found on the Main Menu page.
q DEFAULT button ・・・・・・・・・・・・・・・・・・・・・・ (p. 53)
Press this button when you want to restore the
setting of the item selected in the menu to the
factory default value.
r ID SET button ・・・・・・・・・・・・・・・・・・・・ (pp. 18, 77)
When two or more main units are used in the
system, this button specifies the ID of the remote
control.
t
Top
Bottom
s ID ALL button ・・・・・・・・・・・・・・・・・・・・・ (pp. 18, 77)
When two or more projectors are used in the
system, this button allows all projectors to
be controlled regardless of their current ID
assignments.
t LOCK button
This switch locks the remote to prevent
unintended operation and to prevent the batteries
from becoming spent during shipment.
u Remote control transmitter window
Operate the remote control aiming at the remote
control receiver window on the main unit.
v Remote control wired terminal ・・・・・・・・・ (p. 18)
To use the wired output terminal, connect the
remote control and the main unit with the cable
(sold separately).
Note
•
The AUX input select button is enabled only when
an optional input module is installed.
u
v
ENGLISH – 13