Summary of Contents for RHINO Bighorn series
- Page 1 SAFE OWNER’S MANUAL MODEL NO. _________________________________ SERIAL NO.__________________________________...
- Page 2 ATTACH COPY OF ORIGINAL SALES RECEIPT HERE At Rhino Metals, Inc., our job goes beyond just making safes. We believe our ultimate responsibility is to provide a quality product that creates peace of mind and unmatched value for our customers.
- Page 3 Combination: ___________________________________________ Purchased From: ___________________________________________ Date: ___________________________________________ Rhino Metals, Inc. Makers of Bighorn, Kodiak and Rhino Safes 607 Garber Street Caldwell, ID 83605 208-454-5545 208-459-0819 (FAX) www.rhinosafe.com Toll Free: 800-701-9128 For Technical Support issues, it is helpful to be near your safe when you call.
-
Page 4: Table Of Contents
Moving and Opening Your New Safe Removing Shipping Feet on Bighorn and Kodiak Safes Bolting Down Your Bighorn or Kodiak Safe Removing Shipping Feet on Rhino Safes Bolting Down Your Rhino Safe Getting To Know Your Safe LaGard and SecuRam Electronic Lock Instructions... -
Page 5: Moving And Opening Your New Safe
Simply rotate the hub on the front of the safe clock- wise. Rhino safes with a LaGard electronic lock can be opened by entering 1-2-3-4-5-6 on the keypad and rotating the hub or hand wheel clockwise within 4 seconds. -
Page 6: Removing Shipping Feet On Bighorn And Kodiak Safes
Removing Shipping Feet On Your Bighorn or Kodiak Safe Attention When removing shipping feet, start on one side and then move to the other. Only remove one shipping foot at a time. If your safe is under 500 lbs, use a minimum of 2 people. If your safe is over 500 lbs, professional installation is highly recommended. -
Page 7: Bolting Down Your Bighorn Or Kodiak Safe
Bolting Down Your Bighorn or Kodiak Safe Safe must be bolted directly to floor with the shipping feet removed. To remove shipping feet, please refer to page 3. Your safe is predrilled from the factory for anchoring with 4 holes through the floor of your safe. -
Page 8: Removing Shipping Feet On Rhino Safes
Caution: The door of your safe is extremely heavy and is a safety hazard until bolted down. On Rhino Safes, you will need to unbolt the shipping feet from inside the safe. Exercise extreme caution when opening the door to prevent the safe from tipping over. -
Page 9: Bolting Down Your Rhino Safe
Bolting Down Your Rhino Safe Safe must be bolted directly to floor with shipping feet removed. To remove shipping feet, please refer to page 5. Your safe is predrilled from the factory for anchoring with 4 holes through the floor of your safe. (Located under the floor panel) 1. -
Page 10: Getting To Know Your Safe
The Lock: There are 4 types of locks that are used on Rhino, Kodiak and Bighorn safes. All 4 are UL listed for maximum theft protection and come with a 1 year man- ufacturer’s warranty. - Page 11 The Handles: If your safe did not come with a hand wheel, the handles can be found packaged inside the safe. To install the handles, screw them clockwise into the hub on the front of your safe. Maintenance: Cleaning your safe - To clean the exterior of your safe, use a clean and soft cloth that is slightly damp with water.
-
Page 12: Lagard And Securam Electronic Lock Instructions
LaGard and SecuRam Electronic Lock Instructions LaGard Lock SecuRam Lock Installing or Replacing The Battery -To remove the keypad, push straight up from the bottom of the keypad until it releases. -Carefully pull the keypad away from the safe to prevent damage to the wiring harness. - Page 13 Operating The Lock Enter the existing six digit code. The lock comes from the factory set to 1-2-3-4-5-6. Each key press is confirmed with an audio and visual (LED flash) signal. The lock will indicate a valid code entry with a double signal. ...
-
Page 14: Sargent And Greenleaf Electronic Lock Instructions
Sargent and Greenleaf Electronic Lock Instructions Sargent and Greenleaf Lock Installing or Replacing The Battery -Unlock and open your safe first (if possible). -Pull out on the tab at the top of the lock ring (highlighted in white in pictures) and rotate the ring around the keypad counter- clockwise. - Page 15 Operating The Lock Enter the existing six digit code. The lock comes from the factory set to 1-2-3-4-5-6. Each key press is confirmed with an audio and visual (LED flash) signal. The lock will indicate a valid code entry with a double signal. ...
-
Page 16: Sargent And Greenleaf Manual Lock Instructions
Sargent and Greenleaf Manual Lock Instructions Using Your Manual Lock For the First Time All manual locks come from the factory with the dial locked in place by the Day-Lock. Open your safe by rotating the hub or hand wheel clockwise and pulling the door open. - Page 17 Turn the dial counter-clockwise passing the third number of your combination once. Stop at exactly the third number on the second revolution. Turn the dial slowly clockwise until it stops. You may notice some resistance at around 95 which is normal. Keep rotating until it completely stops at about 87.
-
Page 18: Frequently Asked Questions
Where is my serial number located? For Rhino Safes, the serial number is located on the bottom back corner of the safe and on the lower inside section of the door. For Bighorn and Kodiak Safes, the serial number is located on the right side of the safe near the back top corner and on the lower inside section of the door. - Page 19 You can bend these out using a screwdriver to put tension on your door bolts and pull the door into the frame. Be sure not to pull the door adjustment pads out too far as they can damage your door bolts and make the safe difficult to open. For assistance, call Rhino Tech Support.
-
Page 20: Limited Lifetime Warranty
If possible, the safe will be repaired locally. If the safe is to be repaired at the factory or replaced, Rhino Metals, Inc. will, at its expense, have the safe opened, if required, and will pay for the freight back to the factory.
Need help?
Do you have a question about the Bighorn series and is the answer not in the manual?
Questions and answers
How do I know what model Safeway have?
Bighorn classic safe 19ECB14031657A battery dying (soft beep) Wont open
How do I adjust shelves?
To adjust shelves on the RHINO Bighorn series safe, use the shelf clips provided. The shelves are adjustable using these clips, which fit into the interior slots inside the safe. Note that the weight limit for shelves is 40 lbs, and Gun Barrel Rest shelves are not designed to hold weight.
This answer is automatically generated
This question relates to the 23.12 ****. Ft. Bighorn SafeXsafe sold by Costco: Can the door be removed for transport?