DeWalt DCS575 Original Instructions Manual

Hide thumbs Also See for DCS575:

Original instructions manual (277 pages)

Instructions manual (224 pages)

Instruction manual (76 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the DCS575 and is the answer not in the manual?

Questions and answers

Candice Gappa

January 31, 2025

Was curious on why the Dewalt Circular Saw #DCS575 once in a while will just stop running? any input would be great.

1 comments:

Mr. Anderson

February 10, 2025

The DeWalt Circular Saw DCS575 may occasionally stop running due to stalling or kickback caused by failure to keep the blade aligned in the kerf. Proper alignment is necessary to ensure smooth operation and prevent interruptions.

This answer is automatically generated

Summary of Contents for DeWalt DCS575

Page 1 DCS575 DCS576 Final Page size: A5 (148mm x 210mm)
Page 2 English (original instructions) Copyright D WALT...
Page 3 Figure 1 DCS575 DCS576...
Page 4 Figure 3 Figure 2 Figure 4 Figure 5 Figure 7 Figure 6...
Page 5 Figure 8 Figure 9 Figure 10 DCS575 DCS576...
Page 6 Figure 11 Figure 12 Figure 13...
Page 7 Figure 14 DCS576 Figure 15 100 mm 20 mm DCS576...
Page 8 Figure 16 Figure 17...
Page 9 Figure 18 0˚ 45˚ Figure 19 45° 45° 0° 0° DCS575 DCS576 Figure 20 Figure 21...
Page 10 Figure 22 Figure 23 Figure 24...
Page 11 Figure 26 Figure 25 Figure 28 Figure 27 Figure 29...
Page 12 Figure 30...
Page 13: Circular Saw
English 190 mm (7-1/2") / 184 mm (7-1/4") 54V CORDLESS CIRCULAR SAW DCS575, DCS576, DCS575-XE, DCS576-XE Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users.
Page 14: Definitions: Safety Guidelines
(grounded) power tools. Unmodified plugs CORDLESS CIRCULAR SAW and matching outlets will reduce risk of DCS575, DCS576 electric shock. WALT declares that these products described Avoid body contact with earthed or under Technical Data are in compliance with:...
Page 15 English the power tool. Keep cord away from Do not let familiarity gained from heat, oil, sharp edges or moving parts. frequent use of tools allow you to become complacent and ignore tool Damaged or entangled cords increase the safety principles. A careless action can risk of electric shock.
Page 16: Safety Instructions For All Saws
English that is suitable for one type of battery pack hands are holding the saw, they cannot be cut may create a risk of fire when used with by the blade. another battery pack. b) Do not reach underneath the workpiece. The Use power tools only with specifically guard cannot protect you from the blade below designated battery packs.
Page 17: Additional Safety Instructions For Circular Saws
English kickback forces. Position your body to sluggishly due to damaged parts, gummy either side of the blade, but not in line with deposits, or a build-up of debris. the blade. Kickback could cause the saw to c) The lower guard should be retracted jump backwards, but kickback forces can be manually only for special cuts such as controlled by the operator, if proper precautions...
Page 18: Important Safety Instructions For All Battery Chargers
English • Longest life and best performance can be obtained if the battery pack is charged Read instruction manual before use. when the air temperature is between 65 °F and 75 °F (18° – 24 °C). DO NOT charge the Wear ear protection. battery pack in an air temperature below +40 °F (+4.5 °C), or above +105 °F (+40.5 °C).
Page 19: Charger Operation
English • NEVER attempt to connect two chargers The compatible charger(s) will not charge a faulty together. battery pack. The charger will indicate faulty battery by refusing to light or by displaying problem pack or • The charger is designed to operate on charger blink pattern.
Page 20: Important Safety Instructions For All Battery Packs
English Charger Cleaning Instructions WARNING: Fire hazard. Do not store or carry the battery pack so that WARNING: Shock hazard. metal objects can contact exposed Disconnect the charger from the battery terminals. For example, do AC outlet before cleaning. Dirt and not place the battery pack in aprons, grease may be removed from the exterior pockets, tool boxes, product kit boxes,...
Page 21: Battery Pack
In most instances, shipping a D WALT battery pack BATTERY TYPE will be excepted from being classified as a fully The DCS575 and DCS576 operate on a 54V regulated Class 9 Hazardous Material. In general, battery pack. only shipments containing a lithium-ion battery The DCB546 battery pack may be used.
Page 22: Package Contents
English M. Lower guard lever Charge D WALT battery packs only with designated D WALT chargers. Charging N. Upper blade guard battery packs other than the designated O. Battery pack WALT batteries with a D WALT P. Battery release button charger may make them burst or lead to Q.
Page 23: Using An Extension Cable
English • Connect the blue lead to the neutral terminal. NOTE: The fuel gauge is only an indication of the charge left on the battery pack. It does not indicate WARNING: No connection is to be tool functionality and is subject to variation based made to the earth terminal.
Page 24 English threads and must be turned counterclockwise BLADES to loosen). WARNING: To minimize the risk of eye 3. Remove the blade clamping screw (L) and outer injury, always use eye protection. Carbide clamp washer (V). Remove old blade. is a hard but brittle material. Foreign 4.
Page 25 Bevel Detent (Fig. 9) after the unit has been stopped with the blade in the kerf. Failure to do so can cause stalling The DCS575 and DCS576 are equipped with a and kickback. bevel detent feature. As you tilt the base plate you...
Page 26 REMEMBER: Set the rail adjusters on the saw to (Fig. 1, 6, 12) the guide rail. 1. Undo the screw inside the rail adjuster to allow Your DCS575/DCS576 circular saws are supplied for adjustment between the saw and the guide with a dust extraction port. rail.
Page 27: Prior To Operation
English Before using the saw, the anti-splinter guard (AK) in the parallel cutting position relative to the guide on the guide rail will need tuning in. Refer to Tuning rail. Figure 21 shows the saw in the bevel cutting position relative to the guide rail. the Anti-Splinter Guard.
Page 28 English NOTICE: Do not switch the tool ON or begin to go off the line, don’t try to force it back OFF when the saw blade touches the on. Release the switch and allow blade to come to workpiece or other materials. a complete stop.
Page 29 English 7. Release trigger and allow blade to stop completely before withdrawing the blade from the material. 8. When starting each new cut, repeat as above. Cleaning Dust Extraction (Fig. 30) WARNING: Blow dirt and dust out of the main housing with dry air as often as WARNING: Risk of dust inhalation.
Page 30: Optional Accessories
English Rechargeable Battery Pack ADJUSTING BEVEL ADJUSTMENT LEVER (FIG. 29) It may be desirable to adjust the bevel adjustment This long life battery pack must be recharged when lever (G). It may loosen in time and hit the base it fails to produce sufficient power on jobs which plate before tighten ing.
Page 32 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...

This manual is also suitable for:

Dcs576