Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SkyBell 2.0
Summary of Contents for SkyBell 2.0
- Page 1 SkyBell 2.0 WiFi Video Doorbell (aluminium or bronze) English manual...
-
Page 2: Table Of Contents
Please keep this manual and the receipt in a safe place. 1.1 Functions and features Replace your simple doorbell button by using the SkyBell 2.0 to make your home smart! This revolutionary smart doorbell offers you the possibility to see an talk with... - Page 3 Multiple devices can receive a push notification from your SkyBell. The first person accepting the call can view live images and talk to the visitor.
-
Page 4: Packing Contents
Mounting screws and screw anchors Four wire connectors Digital doorbell adapter (in anti-static bag) Image 2 – Package contents 2.0 Before your start Before you start to install the SkyBell video doorbell please check this chapter first. -
Page 5: Check The Doorbell Chime
Note that the video mentions a minimum power requirement of 10V AC, this has changed to 8V AC for the SkyBell 2.0 2.1 Check the doorbell chime The SkyBell works by default on a mechanical doorbell chime, without having to change anything. For example: Image 3 – Some examples of working doorbell chimes If you have a digital doorbell chime, you need to use the digital doorbell adapter. -
Page 6: Wireless Speed Test
United Kingdom: http://speedtest.net.uk http://diagnostics.bt.com/speedtest/ If you are not able to see a proper video stream once having installed the SkyBell, you might need to use a WiFi repeater to improve your wireless home network. 2.3 Check power input 2.3.1 Connect SkyBell to doorbell transformer with doorbell chime Make sure that the transformer of your doorbell is providing the correct power to the SkyBell. -
Page 7: Power Skybell Using Adapter Without Doorbell Chime
2.3.2 Power SkyBell using adapter without doorbell chime SkyBell is designed to work with a doorbell transformer and doorbell chime. If you do not have a doorbell chime you need to make use of a 10 ohm / 10 W resistor together with a 12V DC power adapter, like this: Image 6 –... -
Page 8: Check Your Wireless Home Network
Note! If you do not wire the SkyBell to a doorbell chime or power adapter with resistor, you may damage the SkyBell and this will void the warranty instantly. Be carefull when mounting the SkyBell video doorbell. The wires may contain power, you may get injured or electrocuted. -
Page 9: Remove The Current Doorbell Button
ENGLISH Image 7 – Turn off doorbell transformer In some cases you need to turn off the end group in the power cabinet/electricity cabinet, to make sure that the transformer is without power. Check if the doorbell is switched off by pressing the doorbell button again. If so, follow the next steps. -
Page 10: Mount The Mounting Plate
(LEVEL, LINE, UP and FACE DOWNWARD) Image 9 – Place the mounting bracket on the wall If necessary use the available adapters to mount the SkyBell in a proper way. Image 10 Door frame adapter Image 11 Wedge mount Now screw the mounting plate (with or without adapters) to the wall using the enclosed screws an dowels. -
Page 11: Connect The Wires
Image 12 – Screw the mounting plate 3.3 Connect the wires Attach each SkyBell wire to the two wires coming out of the wall. Combine the wires next to eachother and twist them together with a rotating move. Insert the wires into the blue connectors. -
Page 12: Turn On The Power
If the LED is blinking slowly the battery is being charged. This may take up to 10 minutes. If the LED is blinking rapidly (about 1 time per second) the SkyBell is ready to be connected to your smartphone (synchronised) No LED is lit at all? Check the wiring of the SkyBell or tighten the cable connectors better to solve this. -
Page 13: Locking The Skybell
(sync) Note! If the LED on the SkyBell is still blinking red, wait until the battery is fully charged. The LED should burn steady before you continue. If the LED is burning red and/or green when motion is detected, the SkyBell is ready to be connected to you home network and synchronised to your smart phone or tablet. -
Page 14: Open The Skybell App For The First Time
Enter your first name and last name with several characters. Enter a valid and existing email address and check this before you continue. This address is also used as a username for the SkyBell app. It is not possible to change this currently. -
Page 15: Adding A Skybell To Your Account
If you do not do this, you cannot connect the SkyBell to your account. 4.3 Adding a SkyBell to your account First check if your SkyBell is fully charged. If the LED is still blinking, wait until it is burning constantly. -
Page 16: Using The Skybell App
You may want to change the security key (WPA/WPA2 with TKIP for example) However, if you have tried several times to sync the SkyBell and you are still not able to get it working, stop the process and contact us for further assistance. -
Page 17: Status Led
6.0 Status LED The SkyBell LED shows several modes of the SkyBell. Red (Solid) = Device has power but no Wi-Fi connection or has not yet been synced Red (Blinking Fast) = Device is in smart configuration mode = setup/sync mode. If stuck in this mode during or directly after a sync attempt, cut power and try to configure again. -
Page 18: Frequently Asked Questions
Green (Blinking for several minutes) = Device has power and Wi-Fi but cannot talk with the SkyBell server. Note that the LED blinks for a couple of seconds when motion is detected. 7.0 Frequently Asked Questions... -
Page 19: Warranty Conditions
11.0 Warranty conditions A two-year warranty period applies to the SkyBell 2.0 WiFi Video Doorbell. When having bought a secondhand e-Domotica product the remaining period of warranty is measured from the moment of purchase by the product’s first owner. The warranty applies to all e-Domotica products and parts inextricably connected to and/or mounted on the main product. -
Page 20: Declaration Of Conformity
No legal rights can be derived from these contents. e-Domotica cannot be held responsible, nor liable for the information contained in this document. e-Domotica is part of Cross Hardware BV SkyBell 2,0 WiFi Video Doorbell manual | 02-2016...
Need help?
Do you have a question about the 2.0 and is the answer not in the manual?
Questions and answers