Effect Modes
Setting a Blank Edge
Unnecessary edge can be erased by setting a blank edge.
When "Zoom" is selected, the erasing width varies depending on the zoom ratio.
1
Place original(s).
Refer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select "More Menus".
4
Select "Zoom / Effects", and then
select "Edge".
68
5
Select "XY" to set the same value for X
and Y, or "X" or "Y" to set a different
value for X and Y.
XY
Select to set the same erasing width
for all sides.
X
Select to set the erasing width for the
right and left sides.
Y
Select to set the erasing width for the
top and bottom sides.