Subscribe to Our Youtube Channel
Summary of Contents for Avol itrio
- Page 1 Wireless Full HD Full HD Full HD Full HD Full HD Full HD Sender REV. C. 1.0 User’s manual (COMPOSITE Model) www.AVL21c.com...
-
Page 2: Table Of Contents
Contents Caution for Safety Caution for Safety ........Introduction Product Introduction . -
Page 3: Caution For Safety
Caution for Safety Please read this user’s manual carefully before using the product. If there is any strange sound, smoke or odor, pull the cable off immediately. (It may cause fire or electric shock) Do not disassemble. (It may cause fire or electric shock.) Do not put any sharpen object into the venting hole of the product. - Page 4 Caution for Safety Always wipe the product off with soft fabric, not water mop. (Water may come inside the product through the venting hole, and it may cause electric shock.) Keep clean the power plug and the outlet. (Dirt may cause a short circuit and fire.) Keep the product out of reach of children.
-
Page 5: Introduction
Product Introduction ■ itrio, using WiFi wireless solution, is the device for sending 1920x1080 Full HD video sources to other location in your house. Once you connect Full HD video sources such as Set top box, Blu-ray player, Multi media player, DVD player or PC to the transmitter and connect the display device to the receiver, you can enjoy wirelessly Full HD video anywhere in your house. -
Page 6: Package Contents
Package Contents ※ Before you use the product, check the following components are all present. Components ■ Transmitter Receiver Stand1 Stand2 Remote Control IR-Flasher User’s Manual Component adaptor Adapter by model ■ - HD-W100 / HD-L100 Adapter1 Adapter2 - HD-P100 PLC1 PLC2... -
Page 7: Operation Control & Function
Operation Control & Function Transmitter Front ■ Description Function Blink : System booting or establishing link between the transmitter and the receiver. ○ Quick Blink : Software upgrading or wireless/LAN mode switching. Power/Link LED ○ On : Finish of link establishment is completed between the transmitter and the ○... -
Page 8: Receiver Front
Operation Control & Function Receiver Front ■ Description Function Blink : System booting or establishing link between the transmitter and the receiver. ○ Quick Blink : Software upgrading or wireless/LAN mode switching. ○ Power/Link LED On : Finish of link establishment is completed between the transmitter and the ○... -
Page 9: Remote Control
Operation Control & Function Remote control ■ Function Description To turn on/off the power of transmitter and receiver. Power on : ○ - If you turn on TX or RX when power/Link LED is on , both devices will be power-on simultaneously within 10 seconds. - You have to turn on each of TX and RX separately when power/Link LED is off, it may takes around 1 min 30 seconds for booting up. -
Page 10: Installation
Installation WiFi product ■ External Device IR Flasher Adapter Adapter Transmitter Receiver Connect external devices to TV. Connect external devices to the transmitter through HDMI/COMPONENT/COMPOSITE port. Attach the IR Flasher in front of IR window of external devices. Connect the receiver to TV through HDMI/COMPONENT/COMPOSITE port. Connect the power adapter of the transmitter. -
Page 11: Plc Transmitter / Receiver Installation Order & How To Install
Installation PLC product ■ External Device IR Flasher Transmitter Receiver Connect external devices to TV. Connect external devices to the transmitter through HDMI/COMPONENT/COMPOSITE port. Attach the IR Flasher in front of IR window of external devices. Connect the receiver to TV through HDMI/COMPONENT/COMPOSITE port. Connect the PLC adapter of the transmitter first. -
Page 12: Operation Checklist From Led Status
Installation Trouble shoot ■ External Device Adapter Adapter Transmitter Receiver Transmitter power/ LED off -> Please check the power connection All LEDs of transmitter blink -> It would take around 1min 30sec for booting. Please unplug the power adapter and connect again when it keeps blinking. Input source LED of transmitter blink ->... -
Page 13: Device With Hdmi : Connect Through Hdmi Port
Installation Device with HDMI : Connect through HDMI port ■ External Device HDMI Select HDMI1 or HDMI2 (Use the the remote controller or the front button on devices) Transmitter Receiver... -
Page 14: How To Install Ir-Flasher
Installation How to install IR-Flasher ■ External Device1 IR Flasher External Device2 Receiver IR Flasher You can connect up to 3 devices External Device3 Use remote controller of IR Flasher external device Transmitter From the receiver, you can remotely control the multimedia player which is connected to the transmitter. Connect IR Flasher to IR-OUT of the transmitter. -
Page 15: Lan Transmitter / Receiver Installation Order & How To Install
Installation LAN model ■ Transmitter Receiver LAN Hub LAN Cable Adapter Adapter Connect LAN cable directly between the transmitter and the receiver, or to the IP router/LAN hub. When you connect the transmitter and the receiver directly by UTP LAN cable, input the both end of LAN cable to the each LAN port of the product. -
Page 16: Product Specification
IR Receiver (front side) for itrio's IR Remote Controller IR in Transmitter IR Flasher (rear side) for others' IR Remote Controller Blasting IR Receiver (front side) for itrio's IR Remote Controller and IR in Receiver optional IR Extensive Receiver (rear side) Power Supply 12V/2.0A DC (US/EU standards, CE/FCC/UL certified) -
Page 17: Supported Port
Product Specification Supported port : How to make link between the transmitter and the receiver. ■ Transmitter Receiver HDMI1/HDMI2 input & Appropriate output port * COMPOSITE(AV) output only supports 1080i/576i/480i input. Composite(AV) input & Appropriate output port * HDMI output is only available for the monitor supported 480i. PC(D-Sub) input &... -
Page 18: Video Format Supported
Note 2. itrio just relays the input format of the video from the transmitter to the receiver. itrio does not change the video format. If you want to change output format, you should change input format on the external device which is connected to the transmitter. -
Page 19: Audio Format Supported
Product Specification Audio Format Supported ■ Digital Audio - Digital compressed audio : AC-3 Dolby Digital, DTS ( Pass Through) Analog audio - 16bit 2-channel linear PCM (44.1kHz & 48kHz) Change WiFi Frequency ■ If there are the devices that use same WiFi frequency, the receiver’s output video may be distorted because of frequency interference. -
Page 20: Software Upgrade
Product Specification Software upgrade ■ Download up-to-dated software (itrio.img) at web page (www.i-trio.com) Store this S/W in "root directory" of USB memory. Plug USB memory into the USB port of the receiver. With LEDs blinking, the receiver and the transmitter will be upgraded in sequence. -
Page 21: Q & A
Q : When itrio is turned on first time, TV screen doesn’t show clearly and after a while turn into clear picture. Is it broken? A : It is not a broken product. - Page 22 www.AVL21c.com...
Need help?
Do you have a question about the itrio and is the answer not in the manual?
Questions and answers