Port Link-Aggregation Group - HP 5900 series Command Reference Manual

Use link-aggregation selected-port minimum to configure the minimum number of Selected ports in the
aggregation group.
Use undo link-aggregation selected-port minimum to restore the default setting.
Syntax
link-aggregation selected-port minimum number
undo link-aggregation selected-port minimum
Default
The minimum number of Selected ports in an aggregation group is not specified.
Views
Aggregate interface view
Predefined user roles
network-admin
Parameters
number: Specifies the minimum number of Selected ports in an aggregation group required to bring up
the aggregate interface. The value range for this argument is 1 to 16.
Usage guidelines
Executing this command might cause all the member ports in the aggregation group to become
unselected.
The minimum number of Selected ports allowed in the aggregation groups of the local and peer ends
must be consistent.
Examples
# Configure the minimum number of Selected ports as 3 in the aggregation group that corresponds to
aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3
Related commands
link-aggregation selected-port maximum

port link-aggregation group

Use port link-aggregation group to assign the Ethernet interface to the specified aggregation group.
Use undo port link-aggregation group to remove the Ethernet interface from the aggregation group to
which it belongs.
Syntax
port link-aggregation group number
undo port link-aggregation group
Default
An Ethernet interface does not belong to any aggregation group.
86