Siemens XLM 1400 Instruction Manual And Installation Instructions page 40

Transport bolts
Before removing the
transport bolts
Removing the transport
bolts
40
Caution
The transport bolts must always be completely remo
ved before using the appliance for the first time.
1. Take the hoses out of the holders.
2. Detach the elbow.
3. Release screws 1, 2 and 3 using the SW 13
wrench until they can be moved freely.
4. Store transport bolts 1 and 2 (screw washer and
bushing onto bolt).
5. Completely remove transport bolt 3 (bolt, spring,
washer and bushing), gripping the drum with one
hand through the open door and pulling forwards
slightly.