Full Screen Logo Show - Gigabyte GA-8SIMLFS User Manual

Setup
Interrupt Mode
APIC
PIC
When you already have IOAPIC enable system and want to upgrade the system please note, since
running an IOAPIC enabled OS (like Windows NT,Windows 2000, Windows XP...) system with none
IOAPIC HW support will cause the system to hang. Following are some situations users might run into:
1.An IOAPIC enabled OS and change the BIOS setting from IOAPIC to PIC, this will cause your system
to hang.)
HDD S.M.A.R.T Capability
S.M.A.R.T. stands for Self-Monitoring and Analysis Reporting Technology which allows your hard
disk drive to report any read/write errors and issue a warning with LDCM installed.
Enabled
Disabled

Full Screen Logo Show

This feature alows you to show either the "Fujitsu Siemens" welcome screen or the
POST screen during boot.
GA-8SIML Motherboard
This Manual: http://www.manuallib.com/file/2596474
The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt. (Default value)
Through IOAPIC generate more IRQ for system use.(Default value)
Use AT stantard IRQ controlles to generate IRQ.
Enable HDD S.M.A.R.T. Capability.
Disable HDD S.M.A.R.T. Capability. (Default value)
Enabled You will see the "Fujitsu Siemens" screen.
Disabled You will see the POST screen
- 30
-