Assembling The Dario System For The First Time; Inserting The Test Strip Cartridge - Dario 1015-01 User Manual

Assembling the Dario System for the First Time

To set up the Dario System for the first time, you must complete the following
procedures:
•
Insert a test strip cartridge, as described in
Cartridge
•
Insert a lancet, as described in
•
Set the lancet depth, if desired, as described in
Depth (Optional)
•
Download and install the Dario App to your smart mobile device,
as described in
25.
•
Set up the Dario App on your smart mobile device using the Dario
App instructions or the instructions provided on the Dario website
at www.mydario.com.
Both ends of the Dario Housing have covers that are removable.
!
The lancet cover is orange with the small opening. Be careful not
to put the cartridge cover on the lancing end. This can damage the
lancet and the lancing device.

Inserting the Test Strip Cartridge

To insert the test strip cartridge:
1. Remove the carbon paper from the device and open the white cover.
2. Remove the new test strip cartridge from its pouch.
3. Hold the test strip cartridge with the side that opens facing up, as shown
in the image below.
on page 21.
on page 24.
Downloading and Installing the Dario App
21
Inserting the Test Strip
Inserting a Lancet
Setting Lancet
on page 22.
on page