Download
Share
Print this page
  1. Manuals
  2. Brands
  3. 9.Solutions Manuals
  4. Camera Accessories
  5. C-pan Arm
  6. User instructions

9.Solutions C-pan Arm User Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual


C-pan arm
USERS INSTRUCTIONS
Designed and made in Denmark
1
of
12

Advertisement

loading
Need help?

Need help?

Do you have a question about the C-pan Arm and is the answer not in the manual?

Questions and answers

Related Manuals for 9.Solutions C-pan Arm

Summary of Contents for 9.Solutions C-pan Arm

  • Page 1 
 C-pan arm USERS INSTRUCTIONS Designed and made in Denmark...
  • Page 2 Limitation of liability: Limits specified by 9.Solutions must be observed. Exceeding these limits must be avoided under all circumstances. In the event of an accident or damages to equipment being used on or around The C-pan Arm, due to negligence or improper use, the manufacturer cannot be held liable for damages or injuries.

  • Page 3: Package Content

    
 Package content: Counter weights Allen wrench Tube clamps Lock pin Counter weight tube C-pan arm Features: 1. Camera screw 2. Camera plate 3. Camera plate forward/backwards tilt adjustment handle 4. Camera plate side to side slide and angulation adjustment handle 5.
  • Page 4 For best stability, spread the legs on the tripod as much as on the left side of the C-pan arm. This will allow the arm to it is possible and make sure all the leg and lock knobs are travel uninterrupted down the side of the tripod.
  • Page 5 It is important 2. Insert the lock pin to test the C-Pan arm at its maximum reach with the camera mounted to set the right weight requirement. Attach camera to the camera plate. The camera screw Use the camera plate tilt to position the camera lens in the has a 1/4”...
  • Page 6 
 Straight and curved movements: Set adjustment handle to mid position for straight Straight movements movement (indicated by a straight line) Setting the adjustment handle at any position to the right of center position creates an outward curved movement. Curved movements (outward). Any radius from 1,5m (59in) to straight can be achieved.
  • Page 7 When operating the C-pan arm, do not jolt the arms back and forth or make it abruptly stop or start. This could be damaging the gears and lead to increased backlash in the whole mechanism.
  • Page 8 It is not recommended to make adjustments to the curvature of the movement when the arm is in a vertical position. There C-Pan arm can be set at any sloped angle between 0 and is a lot of pressure on the gears making readjustments 90 degrees at intervals of 15 degrees.
  • Page 9 
 Tilted and vertical movements: Sloped curved movement Straight vertical movements. Vertical curved movement In and outs or Fly-over movements : To make in and out shots or fly-overs, simply loosen the The camera plate can then be titled to any angle, camera screw and rotate the camera 90 degrees (or the depending on what kind of movement is desired.

  • Page 10: Additional Info

    
 Additional info: To replace or switch the camera screw around, remove plastic plug from slot end and slide camera screw to the The camera screw features a 1/4”-20 thread one one end large opening. and 3/8”-16 thread on the opposite end. At the top of the right rear shaft, there is a 1/4-20”...

  • Page 11: Safety Cautions

    Operate the C-pan from the outside of any of the crossing arms. Cleaning: General cleaning of the C-pan arm can be done using a moist cloth. Do not use any chemicals of any kind on any of the surfaces. ✔ ✘...
  • Page 12 For more info visit: www.9.solutions Contact (International): Email: info@9.solutions Phone: +886 2 25776608 Contact (US): Email: support@us-9.solutions Phone: (877) 919-9349...