Play Menu; Picture Menu; Sound Menu - Panasonic DIGA DMR-E75V Operating Instructions Manual

Advanced Operations

1 Play menu

[RAM] [DVD-R] [DVD-A] [DVD-V]
Disc
Repeat Play
Play
Picture
Sound
Repeat play
This function works only when the elapsed play time is displayed.
[RAM] [DVD-R] [DVD-V]
Title,.Chapter,.OFF
^--------------------------J
[VCD] [CD]
Track,.All,.OFF
^-------------------J
[DVD-A] [MP3]
Track,.Group,.OFF
^--------------------------J

1 Picture menu

[RAM] [DVD-R] [DVD-A] [DVD-V]
Disc
Playback NR
Play
Progressive
Picture
Sound
Playback NR
Reduces noise and picture degradation.
ON()OFF
° Progressive
Select "ON" to enables progressive output.
≥Select "OFF" if the picture is stretched horizontally.
≥When progressive output is on, closed captions cannot be
displayed.
ON()OFF

1 Sound menu

[RAM] [DVD-R] [DVD-A] [DVD-V]
Disc
V. S. S.
Play
Dialog Enhancer
Picture
Sound
V.S.S.
[RAM] [DVD-R] [DVD-V]
(Only for Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using 2 front speakers
only. The effect is broadened and sound seems to come from
virtual speakers on either side if the disc has surround signals
recorded on it.
Natural()Emphasis()OFF()Natural...
Note
≥Turn V.S.S. off if it caused distortion.
≥V.S.S. does not work for bilingual recordings.
[VCD] [CD] [MP3]
OFF
[VCD]
OFF
Transfer
ON Auto
OFF
OFF
While playing a play list
[RAM]
PL (play list),.OFF
^---------------------------J
If the Video CD has playback control
(l 63)
[1]
While stopped (the screen saver is on the
TV), press the numeric buttons to select a
track. (l 19)
[2]
Do the above operation.
Note
≥Repeat play may not work as desired with some discs.
≥You cannot use repeat play to an entire DVD-Audio, DVD-Video,
MP3 discs or all the play lists on a DVD-RAM.
≥While playing back, you can set the repeat play. When stopped, the
repeat play operation is cancelled.
° Transfer
(When "Progressive" is set to "ON".)
Select the method of conversion for progressive output to suit
the type of material being played (l 63, Film and video).
When the output signal is PAL
Auto: Detects 25 frame-per-second film content and
appropriately converts it.
Video: Select when using Auto, and the video content is
distorted.
When the output signal is NTSC
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
Auto2: Compatible with 30 frame-per-second film content in
addition to 24 frame-per-second film content.
Video: Select this when using Auto1 and Auto2, and the video
content is distorted.
° Only when you have set "Progressive" to "On" in the SETUP
menu.
Dialog Enhancer
[DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a centre
channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
ON()OFF
DVD
41