Panasonic KX-TDE200 Installation Manual page 148

3.8.2 Parallel Connection of the Extensions
With DPT
Parallel mode or eXtra Device Port (XDP) mode can be selected through system programming.
If XDP mode is enabled through system programming, parallel connection is not possible. Refer
to "1.11.9 Parallelled Telephone" and "2.1.1 Extension Port Configuration" in the Feature Guide for further
information.
Using a Modular T-Adaptor
To DHLC8 card
4-conductor wiring cord
Connect pins "D1" and
"D2".
Using an EXtra Device Port
With KX-DT300 Series DPT (except KX-DT321)
To DHLC8 card
4-conductor wiring cord
Connect pins "T", "R",
"D1" and "D2".
To DHLC8 card
To SLT
148 Installation Manual
Modular
T-Adaptor
2-conductor wiring cord
Connect pins "T" and "R".
DPT
2-conductor wiring cord
Connect pins "T" and "R".
DPT
TO MAIN UNIT
/ PABX
SLT
SLT
TO TEL