Dell DL4000 User Manual page 103

Text Box
Repository
Encryption Key
b. Click Save.
7. To verify that AppAssure can connect to each machine successfully, select each machine on the
Deploy Agent on Machines window, and click Verify.
8. The Deploy Agent on Machines window shows an icon next to each machine that reflects its
readiness for deployment, as follows:
Text Box
Green icon
Yellow icon
Red icon
9. After the machines are successfully verified, select each machine to which you want to deploy the
AppAssure Agent, and then click Deploy.
10. If you chose the Protect machine after install option, after deployment is successful, the machines
automatically reboot and protection is enabled.
Deploying to machines on a VMware vCenter or ESXi virtual host
Before starting this procedure, you must have the host location information and logon credentials for the
VMware vCenter/ESXi virtual host.
NOTE: All virtual machines must have VM Tools installed; otherwise, AppAssure cannot detect the
host name of the virtual machine to which to deploy. In lieu of the host name, AppAssure uses the
virtual machine name, which may cause issues if the host name is different from the virtual machine
name.
To deploy to multiple machines on a vCenter/ESXi virtual host:
1. From the Core Console, click the Tools tab, and then click Bulk Deploy.
2. On the Deploy Agent on Machines window, click vCenter/ESXi.
3. In the Connect to VMware vCenter Server/ESXi dialog box, enter the host information and logon
credentials as follows and click OK.
Description
Use the drop-down list to select the repository on the Core where the data
from the machines should be stored. The repository that you select is used
for all of the machines that are being protected.
NOTE: This option is only available when you select Protect machine
after install.
(Optional) Use the drop-down list to specify whether encryption should be
applied to the data on the machine that should be stored in the repository.
The encryption key is assigned to all of the machines that are being
protected.
NOTE: This option is only available when you select Protect machine
after install
Description
AppAssure is able to connect to the machine and it is ready to be deployed.
AppAssure is able to connect to the machine; however, the agent is already
paired with a core machine.
AppAssure cannot connect to the machine. This may be because the logon
credentials are incorrect, the machine is shut down, the firewall is blocking
traffic, or another problem. To correct, click Edit Settings on the toolbar or the
Edit link next to the machine.
103