12
Turn on the computer, and press
played.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
13
Press
.
F9
At the confirmation message, select [Yes] and then press Enter .
The Setup Utility settings excluding the password(s) will return to the default values.
14
Select the [Exit] menu and then select [Save Current Values], then press
At the confirmation message, select [Yes] and press Enter .
15
Turn the computer off by using the power switch.
If additional instructions are included with the computer, be sure to read them. It may be necessary to per
form additional operations during the following procedure.
16
Perform the first-time operation (
17
Start the Setup Utility and change the settings as necessary.
several times while [Panasonic] boot screen is dis
F2
page 13).
.
Enter
23