FujiFilm FRONTIER 390 Instruction Manual page 133

No.
E-2521 G laser (G-SHG) current exceeded.
Call technical representative.
E-2522 B laser (B-SHG) current exceeded.
Call technical representative.
E-2523 R laser (R-LD) current measurement value
outside specified range.
Call technical representative.
E-2524 G laser (G-SHG) current measurement value
outside specified range.
Call technical representative.
E-2525 B laser (B-SHG) current measurement value
outside specified range.
Call technical representative.
W-2526 R laser (R-LD) is about to its lifetime.
No problem for the moment, but call technical
representative.
W-2527 G laser (G-SHG) is about to its lifetime.
No problem for the moment, but call technical
representative.
W-2528 B laser (B-SHG) is about to its lifetime.
No problem for the moment, but call technical
representative.
E-2529 SOS detection failed.
Call technical representative.
E-2530 Electric power failure occurred in the exposure
and light source sections.
If problems persist, call technical
representative.
E-2531 Abnormal frame memory.
Call technical representative.
W-2532 G, B laser(SHG) optimal temperature setting
periods.
Set optimal temperature in "Printer
Adjustment/Maintenance" in "Setup and
Maintenance".
W-2533 10 days passed since the last paper condition
setup.
We recommend paper condition setup.
E-2534 R laser (R-LD) temperature sensor abnormal.
Call technical representative.
E-2535 G laser (G-SHG) temperature sensor
abnormal.
Call technical representative.
E-2536 B laser (B-SHG) temperature sensor
abnormal.
Call technical representative.
Message Action to Take
Consult a technical representative.
Set the G and B laser (SHG) optimum
temperature in Menu 454.
(see "Condition Setup and Maintenance".)
Perform a paper condition setup.
Consult a technical representative.
6
135