Insert Sim Card; Maintaining Water And Dust Resistance - Samsung Galaxy S7 edge User Manual

Insert SIM Card

Follow these instructions to insert a SIM card. Remember to power off your phone before inserting a SIM
card.
Note: Your phone's SIM card is preinstalled. These instructions are for reference only.
Caution: Exercise care when using the removal tool to eject the internal SIM card/Memory card tray.
1. Insert the removal tool into the hole on the SIM card/Memory card tray, and push until the tray
pops out.
2. Place the SIM card on the tray.
 Make sure that the card's gold contacts face down into the device and that the card is
positioned as shown.
3. Slide the SIM card/Memory card tray back into the slot.
Important: To prevent water and dust from entering the device, remove any dust on the O-Ring and
ensure the SIM card/Memory card tray is closed tightly.
Caution: If the SIM card is not inserted correctly, the device cannot detect it. Reorient the card and place
it back into the slot if the SIM card is not detected.

Maintaining Water and Dust Resistance

Note: Water-resistant and dustproof based on IP68 rating, which tests submersion up to 5.0 feet for up to
30 minutes.
This device is rated IP68 using the Ingress Protection rating system.
Your device has been tested in a controlled environment and shown to be water and dust resistant in
certain circumstances (meets requirements of classification IP68 as described by the international
standard IEC 60529 - Degrees of Protection provided by Enclosures [IP Code]; test conditions: 15‑35°C,
86‑106 kPa, 5.0 feet, for 30 minutes). Despite this classification, your device is not impervious to water
damage in any situation. It is important that all compartments are closed tightly.
Set Up Your Phone 10