Special Barcode And Mandatory Keyword Settings; Mandatory Keyword; Barcode Into Keyword; Find Csv Data-List Entry With Barcode Scanner - Philips DPM8000 Technical Documentation Manual

3.5.5. Special barcode and mandatory keyword settings

This window enables you to define input options for keywords. You can assign the keywords for the
input options listed below. Activate the checkboxes of those Keywords you want to set the selected
input option for. If you do not want to set an input option, make sure that all checkboxes are
deactivated.

3.5.6. Mandatory keyword

This setting defines the keyword selection as mandatory. This means that you have to provide the
required keyword input before you can start recording.

3.5.7. Barcode into keyword

This setting enables you to scan information into keyword fields using the barcode scanner on the
8500 recorder. You have to provide the required input via barcode scanning; the Digital Pocket
Memo automatically displays the barcode scanning screen.
If the recorder has been configured to work with Linked Keywords, manually changing the values of
keywords 'KW2Usage' to 'KW4Usage' is not allowed.
If the recorder has been configured to work with a PIN code Author list, manually changing the
values of keyword 'KW1Usage' is not allowed.
If the recorder is configured to work with a PIN code Author list, a barcode scan or mandatory polling
of Keyword1 is not possible when working with pre-defined Author PIN code assignment. To
deactivate this specific configuration you need to reset the recorder back to factory defaults.
Note:
This setting is available with Pocket Memo 8500 only.

3.5.8. Find csv data-list entry with barcode scanner

The barcode scanner of a DPM8500 can be used to search for a data-set in the data list.
Page 34 DPM 8000 series - Technical Specification and Advanced Device Configuration
When the top right button (above the slider) is pressed while the data
list is displayed (see picture above), the scanned result will be used to
search for the scanned string in the data list.
The search inside the data list is not limited to a specific row in the
data list. All available list entries are browsed until the scanned string
is found as a data list entry. If the entry is found, the data list cursor is
placed at this data list entry. The user must still select this entry by
pressing "OK" smart button. Only the cursor is moved by this
advanced search with the barcode scanner.
However, the data list display will show only the first two columns for
each data list-row, even if the string is found in the eg.: 3
rd
column.