Table of Contents
Advertisement
Tone Signalling
During an outside call, you can transmit tone signals automatically using the
keypad (e.g., to control answering system remotely).
While dialling
Select "Go to TONE."
Clearing the Number in the Redial Memory
/
Select the redial
number.
Adjusting the Receiver/Speaker Volume
While talking
/
(to increase)
Turning the Handset Ringer off Temporarily
While ringing
(press and hold.)
The ringer will turn back on for the next call.
This function will not work when the handset is on the charger.
Setting the Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted until
the key lock is cancelled. While locked, "[X]" will be shown on the display.
To set
(press and hold.)
/
To clear the selected number
/
Select "Clear."
To clear all numbers
/
Select "All Clear."
(to decrease)
To cancel
(press and hold.)
/
5
Advertisement
Table of Contents
