Tmc Settings - Panasonic CN-GP50N Operating Instructions Manual

In the M
►
The T
Selecting the Type of Displayed Messages
Above the list, the Traffic reports button shows the type of traffic
messaging listed and how many messages of this type are listed.
1. Tap the Traffic reports button.
2. Select the type of messages to be displayed.
3. Tap the OK button.
Displaying Message Details
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
Tap the
►
would like to see details.
Avoiding / Ignoring Congestions
The navigation system can Avoid (
the route. The Avoid / Ignore button shows the corresponding status.
Tap the button to select the alternative setting.
►
Tap the
►
window.
9.2.2

TMC Settings

In the T
►
In the TMC S
station, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
Automatically: Use the arrow keys of the station section to select
►
another station. The system will search for another station if
reception becomes poor.
Hold station: Use the arrow keys of the station section to select
►
another station. The system will search for the same station on a
different frequency if the signal becomes poor.
- 34 -
window, tap on Information > Traffic.
ENU
I
RAFFIC NFORMATION
(Information) button of the message for which you
(Back) button to close the T
I
RAFFIC NFORMATION
window, you can set and configure the TMC traffic
ETTINGS
window opens.
) or Ignore (
window, tap on TMC Settings.
) congestion on
I
RAFFIC NFORMATION
Useful Functions