Usb Storage - D-Link DIR-632 Installation Instructions Manual

11. Reset router by holding down reset button for 10 seconds, status light will go orange again but don't
worry it is just rebooting.
12. You should be good to go, open a new browser window and type 192.168.0.1 and you should get the
Dlink login page. If this doesn't work, try again from step 1

USB Storage

What follows are the steps needs to use storage devices connected to the routers USB port.
1. Connect the USB device to the Router.
2. Restart the router.
3. Open the DD-WRT's web interface in your web browser. It's http://192.168.1.1/ by default.
4. Services -> USB
1. Enable Core USB Support
2. Enable USB Storage Support
3. Enable Automatic Drive Mount
4. Select Save, and then Apply
♦ You can ignore the Status: Not mounted message
FTP Access
Once set up, you will be able to access all the mounted partitions by using ftp://192.168.1.1
1. Serices -> NAS
2. Enable ProFTPD
3. Select other settings and then select Save, and then Apply
File Sharing Access
Once set up, you can access your files using Universal Naming Convention (UNC) names; ex.
\\192.168.1.1\part1. Storage devices can be format as Fat16, Fat32, NTFS, and Ext2. The Ext3 drive format is
not support, and will not mount.
1. Serices -> NAS
2. Add Share
3. Select the Share's Path, enter and name, and indicate is it's public or not. If it's pubic you do not have
to add users.
4. Repeat 2 and 3 for each share
5. Select Save, and then Apply
USB Storage
D-Link_DIR-632
5