Network Camera - Panasonic TC-P46G15 Operating Instructions Manual

Network Camera

You can operate the Network camera from TV's remote and also check the images from Network camera
on your TV
■
Press to exit from
a menu screen
■
Press to return
to the previous
screen
30
Basic operation for Network camera
Preparations
Internet connections (p. 29)
Example of Network Camera connection (p. 31)
Network setting (p. 44)
Before connecting the Network camera to TV, please complete the "IP setting" and run
"Connection test"(p. 44)
Note
This feature is only available with Panasonic-made network cameras released after
summer 2009. (Preliminary model numbers: BL-C210A and BL-C230A) A number of
VIERA-compatible network cameras can be founded at the following sites:
http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
With all connected equipment turned on
Start up Network camera
If there is no registered camera displayed, please set it in "Network Camera"
settings. (p. 31)
Select "Network Camera" in "VIERA Link"
Using VIERA TOOLS
(p. 21)
There is also an option to start with sensor detection.
View
Multi screen (Still image) Without Default camera (Default camera setting (p. 31))
4 split screen
Multi screen
(1/4)
Camera name
Camera 1
Model
BL-C210A
Select OK
RETURN
R 4 cam / 8 cam
Single screen With Default camera (Default camera setting (p.31))
For more details on setting and operation of the Network camera, please also
read the operating manuals for the Network camera.
Record now
Stop recording
VIERA Link control
Network Camera
Speaker output
select
ok
Single screen
Camera name
Camera 1
Model
BL-C210A
Pan
Tilt
RETURN
1 - 9 Preset position
Home position
0
select
ok
TV
9 split screen
Multi screen
(1/9)
Camera name
Camera 1
Model
BL-C210A
Select OK -
1 9
RETURN
R 4 cam / 8 cam