General Information - GE Reason RT430 Technical Manual

A clock referenced to gps and glonass satellites
Hide thumbs Also See for Reason RT430:
Table of Contents

Advertisement

Figure 39: Section to monitor the status of the unit in the Web Interface
The unit status information is grouped into areas, as follows:
Equipment: shows operational information of the unit.
Locked: indicates if the unit is receiving information from at least 4 GPS satellites. If yes, the number
of monitored satellites is indicated.
Antenna: indicates if the GPS antenna is properly connected to the unit.
Alarm: indicates if the unit is presenting internal failure.
Time: presents the local time, UTC, off-set and time zone.
Position: latitude, longitude and altitude information.
Channels: monitored satellites information (number, phase noise, azimuth and elevation).
5.2.2

General information

The section G
I
ENERAL
information of the unit.
RT430-TM-EN-5
of the Web Interface, shown in
NFORMATION
, allows visualizing system
Figure 40
RT430
71

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents