Table of Contents
Advertisement
7. OTHER FUNCTIONS
Display
Select the position format.
• xx.xxx': Shows L/L position with no seconds.
• xx'xx.x": Displays L/L position with seconds.
• LC TD: Loran C TDs
Loran C
When choosing LC TD at Display, do the following:
1) Press the ENT/CNTR key.
2) Select the GRI code, and press the ENT/CNTR key.
3) Press and ENT/CNTR key.
4) Select the pair of slave station, and press the ENT/CNTR key.
TD1, TD2
Enter TD offsets to refine Loran C position accuracy.
7.6
System Menu
In the System menu, you can customize various display settings, for example, time
and date formats, etc.
Key Beep
This item turns the key beep on or off.
Units
The Units item lets you select the unit of measurement for range, speed and distance,
from the units shown below.
7-5
- Quick Links:
- Gps Setup Menu
- Installation
- Input/Output Data
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the GP-39 and is the answer not in the manual?
Questions and answers
How do you set date and time on furuno go-39
To set the date and time on the Furuno GP-39:
1. Time Offset: Enter the time difference between UTC and local time (range: -14:00 to +14:00 in 15-minute steps).
2. Daylight Saving Time: Select "On" if daylight saving time is used in your location.
3. Time Display: Choose between a 12-hour or 24-hour format.
4. Date Display: Select the preferred date format: DD/MMM/YY or MM/DD/YY.
These settings can be accessed through the menu options on the device.
This answer is automatically generated
@Mr. Anderson