FLIPPER
Two Device Universal
Instruction Manual
© Flipper LC 2009. US Patent Pending
Support: www.FlipperRemote.com
Table of Contents
®
Batter y Installation
Use two (2) new AAA batteries. Please see the following
instruction when installing the batteries.
1. Open the battery cover in the back of the remote as
illustrated.
2. Match the batteries to the + and - marks inside the battery
case, then insert the batteries. If the installation is correct,
the indicator light will flash 2 times.
3. Put the battery cover back on.
4. Press any key, if the indicator light flashes, installation is
correct.
Warnings:
1. Do not mix new batteries with old ones or place the
batteries incorrectly.
--------------------------------------------- 2
------------------------------------------------- 2
---------------------------------------------------- 3
------------------------------------- 3
-------------------------- 4
----------------------------------------- 7
--------------------------------------- 7
---------------------------------------------- 7
-------------------------------------------- 8
--------------------------------- 8
----------------------------------- 9
------------------------------------ 10
--------------------------------------- 11
----------------------------------------- 11
--------------------------------------- 12
------------------------------------ 13
--------------------------------- 19
------------------------- 4
------------------- 6
------------------------- 9
1
Need help?
Do you have a question about the FLIPPER and is the answer not in the manual?
Questions and answers