Table of Contents
Advertisement
Basic Transmission Settings
Halftone
(see Note 1)
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is preset
to HALFTONE = Off. You can select either Fast or Quality mode.
Press
HALFTONE
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
Press
to switch it ON or OFF. Press
STAMP
Note:
1. When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored
in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted.
If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax
Parameter No. 028, see page 73.
3. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 004, see page 72.
80
to:
FAST
QUALITY
HALFTONE
HALFTONE = Off
(see Note 2) (see Note 3)
STAMP
STAMP = On
STAMP=ON
FAST
QUALITY
HALFTONE
HALFTONE = Quality
mark.
to return to standby.
SET
STAMP
STAMP = Off
STAMP=OFF
FAST
QUALITY
HALFTONE
HALFTONE = Fast
Advertisement
Table of Contents
