Table of Contents
Advertisement
TPI-PRO-DVI Specif ications (Cont.)
• Certifications:
• Included Accessories:
• Other AMX Equipment:
Supported Input and Output Modes
Refer to the Appendix A: Supported Input and Output Modes section on page 155 for a detailed listing of Input and Output modes
supported by the TPI-PRO-DVI.
Supported Touch Monitors and USB Touch Drivers
Go to
http://www.amx.com//assets/manuals/TPI-PRO.Supported.Touch.Monitors.zip
Touch Monitors and USB Touch Drivers tested with the TPI (including the most current listing of tested serial touch panel drivers).
NOTE: The listing of compatible touch monitors is subject to change due to hidden changes that touch monitor manufacturers make
to their products over time. Compatibility at a past date does not guarantee compatibility in the future, and should be verif ied before
deployment.
A Note About Wall and Rack Installation
Some products are installed in areas of differing temperature and cooling methodologies. These include products installed in walls,
racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must be taken into consideration
to maintain the product within the specified operating temperature.
In FIG. 2, the diagram displays an AMX device in a typical rack mounting, with full air circulation around the front and back of the
device. In this case, the main concern is with heat building up between components, possibly to levels that may affect device
operation.
RACK MOUNTED DEVICES
Heat convection in rack-mounted devices
FIG. 2
Installation Recommendations
During any installation, a lack of ventilation may produce conditions that may adversely affect the device's operation. In these
circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the device's
maximum rated temperature.
NOTE: While the outside temperature of the device may be at or below its maximum operating temperature, special care must be
taken before and during installation to ensure that the maximum operating temperature is not exceeded within wall or rack
installation spaces.
TPI-PRO-DVI - Instruction Manual
• RoHS
• FCC (Class B)
• CE
• IEC/EN60950
• 2-pin PWR connector (41-5025)
• Assembly Kit - Four screws and washers (KA0001)
• Rack Ear brackets (60-0900-03)
• PSN6.5: Power Supply with 3.5 mm mini-Phoenix connector (FG423-41)
• CC-DVI-5BNCM: DVI-to-5 BNC Male Adapter Cable (FG10-2170-08)
• CC-DVI-RCA3M: DVI-to-3 RCA Male Adapter Cable (FG10-2170-09)
• CC-DVI-SVID: DVI-to-S-Video Adapter Cable (FG10-2170-10)
• CC-DVIM-VGAF: DVI-to-VGA Adapter Cable (FG10-2170-13)
T3
T1
AMX DEVICE
T4
TPI-PRO-DVI (Total Presentation Interface-DVI)
to view/download the most recent list of
T2
T1, T2, T3, T4 < TOpMax
T1, T2, T3, T4 > TOpMin
16
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TPI-PRO-DVI-2 and is the answer not in the manual?
Questions and answers