Page 1
Washing machine 5060 T 5080 T 5080 Ç 5100 Ç 5100 ÇS 5120 T...
Page 2
Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
TABLE OF CONTENTS 1 Your Washing Machine Progressing a program Changing the program after the program Overview has started Specifications Child-proof lock Ending the program through canceling 2 Warnings General Safety End of program First Use 6 Quick instructions for Intended use daily use Safety instructions...
Specifications Models Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (kg) Electricity (V/Hz.) 220-240 V / 50hz Total Current (A) Total Power (W) 2100-2500 Spinning cycle (rpm max.) 800 1000 1000 800 1200 Specifications of this appliance may change without notice to improve the quality of the product.
Warnings Please read the following information. First Use Otherwise, there may be the risk of • To prepare your machine for personal injury or material damage. washing, carry out your first washing Moreover, any warranty and reliability process without loading your commitment will become void.
always be securely fastened and remain in an undamaged state. • Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! • Never open the loading door or remove the filter while there is still water in the drum.
Installation Removing packaging 3. Fit the covers (supplied in the bag with the Operation Manual) into the reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. holes on the rear panel. (“P”) C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved...
if there is any water leakage at the connection points. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not Connecting to the water in use.
Therefore, the heights described in • Connection via extension cords or the figure should be followed. multi-plugs should not be made. B A damaged power cable must be replaced by a qualified electrician. B The appliance must not be operated unless it is repaired! There is the risk of electric shock! Destroying the packaging...
Initial preparations for washing Sorting the laundry paper clips. If possible, turn pockets out and brush. • Sort the laundry according to type • Place small items like infants’ socks of fabric, color, and degree of soiling and nylon stockings, etc. in a laundry and permissible water temperature.
starting the washing program. Laundry type Weight (gr.) Never open the detergent dispenser Bathrobe 1200 drawer while the washing program is Napkin running! Duvet cover When using a program without pre- Bed Sheet wash, no detergent should be put into the pre-wash compartment Pillowcase (Compartment no.
Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used. • If the softener has lost its fluidity, dilute dense softener with water before placing it in the detergent drawer.
Selecting a Program and Operating Your Machine Control panel Figure 2 7 - On / Off Button 8 - Door Indicator 9 - Program Follow-up Indicator 10 - Child-proof Lock Indicator 11 - Spin Speed Adjustment Knob 12 - Program Selection Knob 13 - Time Delaying Button 14 - Auxiliary Function Keys 15 - Start/Pause/Cancel Button...
Turning the machine on temperature. Higher temperature means higher power consumption. Prepare the machine for program C For further program details, see, selection by pressing the “On/Off” “Program Selection Table” button. When “On/Off” button is pressed, “Ready” light illuminates Main programs indicating that the door is ready to be Depending on the type of textile, the opened.
washing movements without damaging models equipped with an rpm selection your clothes. knob. In order to protect your clothes, your machine will not spin above 800 Additional programs rpm on synthetic programs and 600 rpm For special cases, there are also extra on woolens program.
Auxiliary functions water by pressing the rinse hold button in order to prevent your clothes become Auxiliary function selection keys wrinkled. You can spin by pressing Select the required auxiliary functions "Start/Pause/Cancel" button after this before starting the program. process. C Auxiliary function buttons may differ Anti-creasing according to the model of your...
making the time delay selection. system has been activated because C More laundry may be loaded/ of unbalanced distribution of laundry removed during the time delay in the machine. period. Changing the program after Changing and canceling the time the program has started delay.
or temperature. New spin speed or lights on the indicator will go off and temperature can be selected. the “Ready” lamp will illuminate. You can select and start a new program Adding/removing laundry in standby when the “Ready” light is lit. mode •...
Quick instructions for daily use Preparation during a later step only if the water 1. Turn the tap on completely. Check if level is low enough to open the the hoses are connected tightly. loading door or if the temperature in 2.
Page 22
program follow-up indicator. Open the loading door and take out the clothes. 2. Press the “On/Off” button. 3. Turn the water tap off. 4. Eliminate any folding of the rubber seal on the loading door and check for impurities. 5. Leave the loading door and detergent drawer open to dry.
Cleaning and care machine can cause rust stains. In Detergent drawer such cases: Remove any powder residue buildup in Clean the drum with a stainless steel the drawer. To do this; cleaning agent. Never use steel wool 1. Press the dotted point on the siphon or wire wool.
under streaming water. • Replace the gaskets and filters carefully to their places and tighten the hose nuts by hand. Draining any remaining water and cleaning the pump filter Filter system in your machine prevents solid items such as buttons, coins and 3- An emergency drain hose is supplied fabric fibers clogging the pump propeller with some of our models.
Page 25
filter to receive water flowing from the filter. • Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water.
Troubleshooting Problem Cause Explanation / Suggestion Machine may have Program switched to self Reset your machine by pressing “Start/Pause/ cannot be protection mode due to Cancel” button for 3 seconds. (see, Canceling a started or an infrastructure problem Program) selected. (such as line voltage, water pressure, etc.).
Page 27
No water can This is not a problem. The be seen in the water level is not visible machine during from the outside of the washing. machine. Water level might be above Run either the “Pump” or “Spin” program. the lower level of the door. Machine might be heating up the water or it may be at Wait until the process is over.
Page 28
In the case of a paused countdown while taking in The machine will wait until there is a sufficient water: amount of water to avoid poor washing results Timer will not countdown due to lack of water. Then the timer will start to until the machine is filled count down.
Page 29
Insufficient amount of Use recommended amount of detergent detergent used. appropriate for the laundry. Washing Excessive laundry loaded performance is Do not load the machine in excess. into machine poor: Stain could not Wrong program and Select the proper program and temperature for be removed, temperature might have the laundry to be washed.
Page 30
If the water hardness is higher, using insufficient Insufficient amount of amount of detergent can cause the laundry to detergent used. become stiff in time. Use appropriate amount of detergent according to the water hardness. If detergent is put in the prewash compartment Clothes The detergent may have although prewash cycle is not selected, the...
Page 31
You may not be using proper detergent for Use only automatic washing machine detergents automatic washing in your washing machine. machines. Excessive amount of detergent may have been Use only sufficient amount of detergent. used. Too much detergent may have been used for a small Use only sufficient amount of detergent.
Need help?
Do you have a question about the 5060 T and is the answer not in the manual?
Questions and answers