Table of Contents
Advertisement
KEYLESS ENTRY ALARM UPGRADE MODULE
Congratulations on your purchase of the PRO 2032 automotive Keyless Entry
Upgrade Alarm System. This system is a state-of-the-art auto security system that
is designed to automatically arm and disarm when it receives a command from your
existing Factory Keyless Entry Transmitter. Taking a few moments to read this
manual will help to ensure that your vehicle is protected at all times.
NOTE: This unit has the capability to operate an optional siren, the vehicle horn, or
both. Where referenced (the siren will chirp) the siren may chirp, the horn
may beep or both may occur.
ARMING THE SYSTEM: ( ACTIVE )
1. Turn the ignition key off, exit the vehicle and close all doors.
2. Press and release the Lock button on the keychain transmitter.
3. The siren will chirp one time, the parking lamps will flash one time, and the red
dash mounted LED will begin to slowly flash, indicating that the system is
ARMED.
NOTE: If the unit beeps three times when arming, then one of the entry points
(hood, trunk, or doors) has been left opened. Closing the hood, trunk, or
door will correct the problem and the system will emit a single chirp to
confirm that the problem has been corrected. Additionally, if illuminated
entry is a feature of the Factory Keyless Entry system, the alarm may chirp
3 times every time the system is armed and chirp one additional time
when the interior light turns off to confirm that all trigger zones are fully
operational.
4. Any time the door lock switch in the vehicle is used to lock the doors while the
ignition key is turned off, the system will immediately arm. To lock the doors after
entering the vehicle, make sure the ignition key is switched on first. Turning the
ignition key on first will stop the system from arming.
ARMING THE SYSTEM: ( PASSIVE )
1. Turn the ignition key off, exit the vehicle, and close all doors.
2. The dash mounted LED will begin to flash rapidly, indicating that the system is
automatically ( passively ) arming. As an added convenience, the 30 second
automatic passive arming will not begin until all doors are closed, allowing
passengers to exit the vehicle at their convenience.
Released 7-23-01.
Model PRO 2032
OWNER'S MANUAL
1
128-6132
1 OF 8
Advertisement
Table of Contents
Related Manuals for Audiovox Pursuit PRO 2032
Summary of Contents for Audiovox Pursuit PRO 2032
- Page 1 KEYLESS ENTRY ALARM UPGRADE MODULE Congratulations on your purchase of the PRO 2032 automotive Keyless Entry Upgrade Alarm System. This system is a state-of-the-art auto security system that is designed to automatically arm and disarm when it receives a command from your existing Factory Keyless Entry Transmitter.
- Page 2 3. In 30 seconds, you will hear a single short chip from the siren and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed.
- Page 3 INTRUSION WARNING SIGNALS : The system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If an intrusion attempt has occurred, the siren and or horn will beep four times when the system is disarmed. The vehicle’s parking lights will also flash three times to indicate an intrusion has occurred.
- Page 4 MANUALLY OVERRIDING YOUR SYSTEM USING THE VALET SWITCH MANUAL OVERRIDE Your Security System can be disarmed without the use of the keychain transmit- ter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. If your system has been selected for Valet Switch manual override as indicated on the last page of this manual, to by-pass the alarm system;...
- Page 5 NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code. Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52”...
- Page 6 If your existing factory installed keyless entry system did not include the automatic door lock and unlock feature, then this feature can be activated from the PRO 2032 upgrade module. When this accessory has been added, any time the ignition key is turned to the on position and all vehicle doors are closed, the doors will lock in 4 seconds.
- Page 7 PRO 2032 SYSTEM FUNCTIONS AT A GLANCE DASH LED INDICATORS RAPID FLASHING... PASSIVE ARMING SLOW FLASHING...ARMED OFF...DISARMED ON SOLID...VALET MODE 3 FLASH...PAUSE...INTRUSION ZONE 2 FLASH...PAUSE...INTRUSION ZONE 2 1 FLASH...PAUSE...INTRUSION ZONE 1 CHIRP INDICATORS 1 CHIRP *...ARM 2 CHIRPS*...DISARMED 3 CHIRPS ...ARM WITH INTERIOR 4 CHIRPS ...DISARM AFTER INTRUSION...
- Page 8 Audiovox Electronic Corp. 150 Marcus Blvd. Hauppauge, N.Y. 11788 128-6132 128-6132 8 OF 8...
Need help?
Do you have a question about the Pursuit PRO 2032 and is the answer not in the manual?
Questions and answers