CAUTION:
Link-aggregation traffic redirection applies only to dynamic link aggregation groups.
To prevent traffic interruption, enable link-aggregation traffic redirection on devices at both ends of the
aggregate link.
To prevent packet loss that might occur at a reboot, disable both MSTP and link-aggregation traffic redirection.
In an IRF fabric that adopts the ring connection, slight packet loss can occur when the IRF member switch
enabled with link-aggregation traffic redirection reboots. To prevent packet loss, you can enable local-first load-
sharing for link aggregation on all IRF member switches (see
aggregation‖).
Displaying and maintaining Ethernet link
aggregation
To do...
Display information for an
aggregate interface or multiple
aggregate interfaces
Display the local system ID
Display the global or group-
specific link-aggregation load-
sharing criteria
Display detailed link aggregation
information on link aggregation
member ports
Display the summary of all
aggregation groups
Display detailed information
about a specific or all
aggregation groups
Clear LACP statistics for a specific
or all link aggregation member
ports
Clear statistics for a specific or all
aggregate interfaces
Ethernet link aggregation configuration examples
―Enabling local-first load sharing for link
Use the command...
display interface bridge-aggregation [ brief [
down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation interface-
number [ brief ] [ | { begin | exclude | include
} regular-expression ]
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
display link-aggregation load-sharing mode [
interface [ bridge-aggregation interface-number
] ] [ | { begin | exclude | include } regular-
expression ]
display link-aggregation member-port [
interface-list ] [ | { begin | exclude | include }
regular-expression ]
display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
display link-aggregation verbose [ bridge-
aggregation [ interface-number ] ] [ | { begin |
exclude | include } regular-expression ]
reset lacp statistics [ interface interface-list ]
reset counters interface [ bridge-aggregation [
interface-number ] ]
43
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in user
view
Available in user
view
Need help?
Do you have a question about the A5120 EI Series and is the answer not in the manual?
Questions and answers