Related Manuals for DEEBOT N78
Summary of Contents for DEEBOT N78
-
Page 1: Instruction Manual
Instruction Manual Note: This Instruction Manual applies to units purchased in North America only. FR-CA... - Page 2 Congratulations on the purchase of your ECOVACS ROBOTICS DEEBOT! We hope it brings you many years of satisfaction. We trust the purchase of your new robot will help keep your home clean and provide you with more quality time to do other things.
-
Page 3: Table Of Contents
Contents 1. Important Safety Instructions......................2 2. Package Contents and Technical Specifications..............4 2.1 Package Contents........................4 2.2 Specifications..........................4 2.3 Product Diagram........................5 3. Operating and Programming......................8 3.1 Notes Before Cleaning......................8 3.2 Quick Start............................9 3.3 Cleaning Mode Selection......................12 3.4 Intelligent Scheduling......................13 3.5 Optional Mopping System....................14 3.6 Alarm Indicator and Sounds....................16 4. -
Page 4: Important Safety Instructions
1. Important Safety Instructions When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS 1. This Appliance is not intended to be used by children under 8 or anyone lacking knowledge on proper use. - Page 5 1. Important Safety Instructions 22. Turn OFF the power switch before cleaning or maintaining the Appliance. 23. The plug must be removed from the receptacle before cleaning or maintaining the Charging Dock. 24. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
-
Page 6: Package Contents And Technical Specifications
2. Package Contents and Technical Specifications 2.1 Package Contents Instruction Manual FR-C A Mode d'emploi Manual de Instrucciones ES-LATA M Robot Charging Dock Remote Control with Instruction Manual Button Cell Battery (4) Side Brushes (2) Washable/ Water Reservoir Replacement High Reusable Microfiber Efficiency Filter+ Cleaning Cloths... -
Page 7: Product Diagram
2. Package Contents and Technical Specifications 2.3 Product Diagram Robot 14 13 1. Top Cover 6. Side Brushes 11. Water Reservoir Slots 2. Control Panel 7. Suction Intake 12. Infrared Receiver for Remote Control 3. Anti-Collision Sensors 8. Driving Wheels 13. - Page 8 2. Package Contents and Technical Specifications Charging Dock 1. Infrared Signal Generator 2. Charging Dock Pins Remote Control 1. AUTO Mode Button 2. Direction Control Buttons 3. START/PAUSE Button 4. Return to Charger Mode Button 5. Spot Cleaning Mode Button 6.
- Page 9 2. Package Contents and Technical Specifications Water Reservoir 1. Washable/ Reusable Microfiber Cleaning Cloth 2. Water Reservoir 3. Water Inlet...
-
Page 10: Operating And Programming
3. Operating and Programming 3.1 Notes before Cleaning Before operating DEEBOT, take a few moments to survey the area to be cleaned and remove any obstacles. Remove power cords and small objects from This product cleans bare floors and short- the floor that could entangle the product. -
Page 11: Quick Start
A t t a c h S i d e B r u s h e s t o t h e b o t t o m o f DEEBOT by pressing a brush into each slot with the matching color until it clicks. - Page 12 To reactivate the battery: Place the robot on the Charging Dock by hand, remove after charging for 3 minutes; repeat 3 times, then charge normally for 3-5 hours. DEEBOT uses a long life battery, and does not require frequent replacement. To replace the battery, contact Customer Service or follow the below instructions: a.
- Page 13 3. Operating and Programming Start Press the AUTO Mode Button on DEEBOT or on the Remote Control. DEEBOT starts to work immediately in AUTO Cleaning Mode. To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.
-
Page 14: Cleaning Mode Selection
3. Operating and Programming 3.3 Cleaning Mode Selection DEEBOT has several Cleaning Modes to choose from to effectively clean different floors. Cleaning Modes are selected with the Remote Control. AUTO Cleaning Mode Edge Cleaning Mode This is the most commonly used mode. In... -
Page 15: Intelligent Scheduling
All scheduled cleanings are performed in AUTO Cleaning Mode. Set Intelligent Scheduling Press the Auto Mode Button on DEEBOT twice or press the Intelligent Scheduling Button on the Remote Control to set the current time as the scheduled cleaning time. Intelligent Scheduling is set when the robot beeps and the Intelligent Scheduling Indicator Light glows a continuous BLUE. -
Page 16: Optional Mopping System
Cloth attached to a proprietary Water Reservoir. Do not use the mopping system on carpet. When using the mopping system, fold area rug edges under themselves so DEEBOT will avoid the rug. When using the mopping system, do not stop the robot and allow it to stand still. This prevents the Cleaning Cloth from leaving water on the floor. - Page 17 Reservoir into the Water Reservoir Slots on the bottom of the robot until you hear a click. Start Remove Select the desired Cleaning Mode. DEEBOT After DEEBOT finishes cleaning, remove sweeps, vacuums and mops in the selected the Water Reservoir from DEEBOT, empty mode.
-
Page 18: Alarm Indicator And Sounds
3. Operating and Programming 3.6 Alarm Indicator and Sounds If DEEBOT detects a problem and needs your assistance, it emits alarm beeps and the Alarm Indicator flashes RED. Alarm Sound Problems Solution Check Driving Wheels for tangled hair or One Beep... -
Page 19: Maintenance
4. Maintenance Before per forming cleaning and maintenance, power OFF DEEBOT and unplug the Charging Dock. 4.1 Dust Bin and Filters Cleaning the Dust Bin and Filters Open the robot's Top Cover and remove the Dust Bin. Open the Dust Bin Lock and empty the Dust Bin. -
Page 20: Washable/Reusable Microfiber Cleaning Cloth And Water Reservoir
Cleaning the Washable/Reusable Microfiber Cleaning Cloth If the mopping system was used, remove the Wash the Cleaning Cloth by hand, and lay Water Reservoir from the bottom of DEEBOT flat to dry. and remove the Cleaning Cloth. Empty any remaining water from the Reservoir. -
Page 21: Suction Intake And Side Brushes
Empty any remaining water from the Reservoir, and set out to dry. * If the Water Reservoir does not run out of water after DEEBOT cleans for 60 minutes, the water outlets on the Reservoir are clogged. Clean the Reservoir with the provided ECOVACS Reservoir Cleaning Solution according to the instructions on the bottle of the solution. -
Page 22: Other Components
4. Maintenance 4.4 Other Components Use the Multi-Function Cleaning Tool to cut Wipe the Anti-Drop Sensors with the brush or off and remove any hair tangled around the felt side of the Multi-Function Cleaning Tool Universal Wheel. to maintain their effectiveness. Wipe the robot’s Charging Contacts and Charging Docks Pins with the brush of the Multi-Function Cleaning Tool or with a dry cloth to maintain their effectiveness. -
Page 23: Troubleshooting
5. Troubleshooting Please use this chart to troubleshoot common problems using DEEBOT. Malfunction Possible Causes Solutions DEEBOT is not powered ON. DEEBOT will not charge unless Move the robot's Bottom Power Switch it is powered ON while on the to the ON position. - Page 24 DEEBOT is powered OFF. Power ON DEEBOT. DEEBOT Keep DEEBOT powered ON and on will not clean the robot's battery is low. the Charging Dock to make sure it has automatically at full battery to work at any time.
- Page 25 Designed and Manufactured by / Conception et Fabrication par / Diseñado y fabricado por ECOVACS ROBOTICS, Co., Ltd MADE IN CHINA/FAIT EN CHINE/HECHO EN CHINA Distributed by/Distribué par/Distribuido por ECOVACS ROBOTICS, Inc. DEEBOT N78-EC-IM2016R06 Canton, OH, USA/Canton, OH, É.-U./Canton, OH, EE. UU.
Need help?
Do you have a question about the N78 and is the answer not in the manual?
Questions and answers