Removing The Hard Disk Drive; Hard Disk Disassembly Process - Schenker XMG P505 Service Manual

Disassembly

Removing the Hard Disk Drive

Figure 4
HDD Assembly
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
Removal
or 7mm (h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as
outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
a. Locate the HDD.
b. Remove the screws.

Hard Disk Disassembly Process

1. Turn off the computer, and remove the battery
2. The HDD will be visible at point
3. Remove screws
a.
b.

6. Hard Disk
• 3 Screws
2 - 8 Removing the Hard Disk Drive
on the mainboard
1
- from the HDD assembly
2 4
1
2
3
(page 2 - 6).
(Figure 4a ) .
(Figure 4b).
4

HDD System Warning
New HDD's are blank. Before you
begin make sure:
You have backed up any data you
want to keep from your old HDD.
You have all the CD-ROMs and
FDDs required to install your oper-
ating system and programs.
If you have access to the internet,
download the latest application and
hardware driver updates for the op-
erating system you plan to install.
Copy these to a removable medi-
um.