GE 345 Quick Start Manual page 54

Transformer protection system

Hide thumbs Also See for 345:

Table of Contents

SOFTWARE SETUP

If you are going to communicate from your computer to the 345 Relay using the USB

port:

10. Plug the USB cable into the USB port on the 345 Relay then into the USB port on your

computer.

11. Launch EnerVista SR3 Setup from LaunchPad.

12. In EnerVista > Device Setup:

13. Select USB as the Interface type.

14. Select 345 Relay as the USB device.

345 TRANSFORMER PROTECTION SYSTEM – QUICKSTART GUIDE

CHAPTER 3: INTERFACES

Table of Contents