Philips Pronto User Manual page 31

To add an action to the action list
1 Tap
The last visited page appears again.
2 Navigate to the Device and the Page that contains the button you want
to add to the macro.
3 Tap the button you want to add to the macro.
The 'Macro' screen appears.
The action of the selected button is added at the bottom of the Action List.
4 You can select other buttons to add to the macro.
To add a delay to the action list
You can add a delay to the action list e.g. to insert a short pause between turning
on a device and sending commands to it, allowing the device to warm up.
1 Tap
The '+' button and '-' button appear on the two middle hard buttons below the
touch screen.
2 To increase the delay, tap (and hold) the '+' button.
-or-
To decrease the delay, tap (and hold) the '-' button.
To add a beep to the action list
To determine when the macro execution is finished, it is useful to add a beep as
final command in the action list.
1 Select the action in the action list, where you want to add a beep.
The action is selected.
2 Tap
A default beep is added to the action list, after the selected action.
To finish the macro
1 Tap
The macro is created and assigned to the button you selected as a target.
2 Press the left hard button
Macro Tool.
User Guide
Using the Power Features
in the 'Macro' screen.
in the 'Macro' screen.
in the 'Macro' screen.
in the 'Macro' screen.
31
below the touch screen to exit the