Panasonic AW- PH350 Operating Instructions Manual page 26

Examples of connections
4. When connecting a pan-tilt head through a network and controlling the camera
and pan-tilt head using a personal computer
Printed circuit board
switches:
WEB settings
CONTROL IN IP/RP
Cable with a nominal cross
section of 1.25 mm
max. 98.4 feet (30 meters)
O I
AC adapter:
AW-PS300
OUse the camera/pan-tilt head connecting cable (AW-CA50F29) to connect the pan-tilt
head with the convertible camera in which a WEB card (AW-PB309), etc. has been
installed.
OSet the printed circuit board switches to the WEB settings.
OUse a 10BaseT straight cable (UTP category 5) to connect the personal computer
(Windows) and convertible camera via a hub.
OInstall browser software (Netscape or Internet Explorer) in the personal computer
(Windows).
OUse the browser software to input the IP address which was set on the WEB card,
and check that the pan-tilt head and camera can be controlled using the personal
computer.
Pan-tilt head cable:
AW-CA50F29
10BaseT straight cable:
UTP category 5, max. 328 feet (100 meters)
or more
2
10BaseT straight cable:
UTP category 5, max. 328 feet (100 meters)
HUB
26
Personal computer
(Windows)