Wireless Network - Grundig 48 VLE 666 BL User Manual

neTWoRK­seTUP
Wireless­network
Wireless­network­connection
There are different ways of making the wireless network
settings. »Wireless« and »Wireless WPS« (WiFi Protected
Setup).
1 Television includes a built-in Wireless WiFi Adapter to
connect it to wireless network.
notes:
Wireless LAN adapter supports IEEE 802.11B/G and
7
N communication protocols. We recommend you to use
IEEE 802.11N protocol to obtain the best performance in
wireless HD video playback.
If you use a modem that supports IEEE 802.11B/G, video
7
playback performance may be poor when compared
to a modem that supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol is lower.
Please note that video playback performance in a DLNA
7
application on a wireless local network and in a SMART
Inter@ctive TV 3.0 application on a network with internet
connection depends on the number of users on the
network as it is the case in every wireless network.
It is recommended to switch off the equipment that are
7
not in use in home network in order to avoid unnecessary
network traffic.
Placing the modem or wireless network sharer on an
7
elevated location will increase the wireless connection
reception strength.
Wireless connection reception strength may vary
7
depending on the type of the modem and the distance
between the modem and television.
20­ enGlIsH
­-------------------------------------------------------------------------------------------------------------
­ W ireless­network­settings
You have several ways to connect your TV to your home
network.
a
Automatic connection,
a ll data regarding connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) are obtained from
modem automatically.
D epending on the router, you can use the following
options:
– O ption "WPS-PBC" (Push Button Configuration);
– Connecting with a WPS PIN;
– C onnecting by entering the network password.
b Manual connection,
a ll data regarding connection settings (»IP Address«,
»Netmask«, »Gateway« and »DNS«) must be configured
manually.
Technical­requirements­
Most of the home networks are Dynamic. If you have a
dynamic network, you must use a DSL modem that supports
DHCP. Modems and IP sharers that support DHCP obtain the
»IP Address«, »Netmask«, »Gateway« and »DNS« values
required for internet access automatically, and thus you are
not required to enter those values manually.
­ W ireless­WPs­network­connection­through­
by­pressing­a­button
1
Open the menu with »MenU«.
2
Activate the menu item »Settings« with »oK«.
3 Select the menu item »Network Configuration« with »
or »
– » Network configuration« menu is displayed.
4
Select the line »Change Connection Type« with »
»
Λ
5 Select the option »Wireless WPS« with »
press »oK« to confirm.
– W iFi warning screen will be displayed.
6­ Activate WiFi with »
7 Select the line »WPS Type« with »
the option »Push Button« with »
Timer Applications
8
With »
connection.
– » Push the WPS button on your Access Point« message
9 Press the WPS button on the router.
<
« and press »oK« to confirm.
« and press »oK« to confirm.
« (green).

Network Configuration
Change Connection Type
WiFi
WPS Type
Select Access Point
Network Configuration
Advanced
Connect Test Connection
« (red) select »Connect« to establish modem

is displayed.
>
«
« or
V
< >
« or » « and
« or » « and select
V Λ
< >
« or » «.
TV Settings
Wireless WPS
On
Push Button
N/A
AUTO
Change Area Back Exit