Command Control Settings - Hitachi CP-AW3005 User Manual

Command control settings

[TCP #23]
1. Command format
Same as RS-232C communication, refer to RS-232C Communication command format.
2. Response code / Error code
(1) ACK reply : 06h
Refer to RS-232C communication
(2) NAK reply : 15h
Refer to RS-232C communication
(3) Error reply : 1Ch + 0000h
Refer to RS-232C communication
(4) Data reply : 1Dh + xxxxh
Refer to RS-232C communication
(5) Authentication error reply : 1Fh + 0400h
[TCP #9715]
1. Command format
TCP#9715 are used.
Header
0×02
[Header]
02, Fixed
[Data Length]
[RS-232C commands]
Refer to RS-232C Communication command format (10).
[Check Sum]
[Connection ID]
NOTE
code.
Command Control via the Network (continued)
RS-232C command
0×0D
(11).
(11).
(11).
(11).
14
Connection ID