Panasonic KX-HNS102 Installation Manual page 13

3
Attach the motion sensor to the
rear cover.
R Insert the grooves on the
motion sensor to the 4 tabs on
the rear cover, and then push
down the motion sensor.
U P
Using the wall mounting adaptor
1
Remove the rear cover by
pressing the upper sides of the
cover (A) and then sliding it down
(B).
A
B
For assistance, please visit www.panasonic.com/support
2
Attach the wall mounting adaptor
to the wall by using screws (
R Place the wall mounting
adaptor with "UP" mark facing
upwards.
2
R 21 mm (27/32 inches)
UP
1
1
3
Attach the motion sensor to the
wall mounting adaptor.
R Insert the grooves on the
motion sensor to the 4 tabs on
the wall mounting adaptor, and
then push down the motion
sensor.
Setup
1
).
2
13